Dual Output Industrial Laser Welding Machines For Channel Metal Letters 300W To 600W

Laser System:

Laser Power: 300W

Laser Source: Nd³⁺:YAG rod ф7*145mm

Laser Wavelength: 1064um

Pulse Width: 0.2~20ms, gradational adjustable

Pulse Frequency: 1-30HZ

Max Single Pulse Energy: 80J

Laser Class: Class IV industrial laser

Electrical System:

Control System:

Operation Interface: English, LED touch screen

Loading Period: 1 minute

Program storage: 100 settings

Additional Features: chiller alarm (water pressure and temperature)

Optical System:

Extending ratio: 8 times

Focus length: 150mm (200mm optional)

Protective Glass: ф40mm, thickness 2mm

Cooling System

The equipment employs water cooling system in which the magnetic pump drives the circulating water to cool the laser crystal and pumping lamp, with overheat and overflow protection. The deionized water with resistance rate more than 0.5MΩ-cm is used as the circulating water, 15 liters for each time. The circulating heat is taken away by the refrigerating machine and finally discharged into the outside by the fan.

Working Environment & Continuous Operation Time

Working environment should be clean, dust-free, far from vibration, temperature 5℃ to 32℃, humidity≦90%. Preferably in a separate room from the production floor with adequate ventilation.

Continuous working time up to 18 hours per day.

About this machine:

Reversed stainless steel channel letters become more and more popular in the signage industry.

Since the introduction of CNC channel letter returns, bending equipment, the industry was searching for a better and quicker system to connect the returns to the face plate.

Traditionally fixing was done via glue, rivets or soldering, they are time-consuming with not perfect results.

Laser welding technology solved all the issues by defusing the two parts together, with beautiful and durable results.

No need to use glue or soldering with less pollution.

From any aspect, laser welding is the best solution and also the greenest.

Application:
Applied to welding channel metal letters, LED illuminated letters, customized signage and logo.

Features:

• Red light positioning, CCD display
• A hundred different programs can be saved and quickly selected
• Adjustable work table allows welding from small size to large size
• Fast working speed; professional jig ensures the focus fixed to make welding easier without using CCD or microscope
• Minimal distortion due to heating.
• Capable of partial heating process.
• Able to deal with complex logo and small letters.
• Low noise and no pollution.
• Ultra-fine locating pin makes corner welding easier without changing spot position
• Seven inch touch screen control panel for quicker changeover between materials