3 Heating Zones Smd Led Soldering Machine , Computer Controlled Smd Reflow Oven

1.01 The whole machine is controlled by Siemens PLC + industrial control machine + temperature control module, which is stable and reliable
1.02 Powerful control software, running on Windows 7 system, can switch between Chinese and English at any time
1.03 Spray movement is controlled by stepper motor
1.04 Japanese lacquer nozzle, adjustable spray area and depth
1.05 Flux manual supply system, maintain constant flux supply
1.06 Complete flux recovery and exhaust filtration system, environmentally friendly
1.07 total length of four sections of hot air preheating zone 2000mm, PID temperature control method
1.08 Heater modular design, easy maintenance
1.09 Molded curved tooth impeller, patented nozzle design, realize ultra-low oxidation
1.10 Tin furnace liner adopts cast iron enamel material
1.11 Sibo economic operation mode, less oxidation, energy saving
1.12 All titanium alloy chain claw, resistant to corrosion and high temperature, never deformed
1.13 Adjustable shock wave crest and intensive flat wave width to save energy and reduce oxidation
1.14 Dual cooling zone design, adopting forced cooling method of upper and lower fans, optional forced water cooler
1.15 Equipped with new titanium alloy double hooks, aluminum alloy rail anti-deformation structure design
1.16 Manually adjust the width of the substrate; the conveying angle can be adjusted
1.17 The transportation speed is controlled by frequency converter, stepless speed regulation
Ranch
2.00 Overall technical parameters
2.01 Control method: computer + PLC
2.02 Transportation motor: 1P AC220V, 60W
2.03 Transport speed: 0-2000mm / min
2.04 substrate size: 30-350mm (W)
2.05 Flux capacity: 6L
2.06 pre-heating zone: 2000mm four-stage PID full hot air independent control, room temperature ~ 250 ℃
2.07 Tin furnace heating: 1KW * 9PCS room temperature ~ 300 ℃
2.08 wave height: Approx.12mm
2.09 Tin furnace capacity: 320KG
2.10 Wave motor: 3P AC220V, 0.18KW * 2PCS
2.11 Claw washing pump: 1P AC220V 6W
2.12 Transport direction: L → R (R → L optional)
2.13 Welding angle: 3-6 °
2.14 Flux pressure: 3-5 BAR
2.15 Power supply: AC380V 50HZ / 60HZ
2.16 Normal operating power / total power: 8KW / 30KW
2.17 Body size: 4500 × 1420 × 1750mm
2.18 Net weight: 1800KG