Fosc Fiber Optic Joint Enclosure 144/360/720 Fiber Mechanical / Heat Shrink Seal

fosc fiber optic closure, large capacity dome type 144/360/720fiber,mechanical seal or heat shrink seal optional

GPJ09-5817 series dome joint closure includes the following three models: GPJ09-5817-A, GPJ09-5817-B and GPJ09-5817-C. The most obvious feature of this series is that it has a large capacity, and the number of fiber trays that can be spliced also be more, so it is also called large-capacity cap box.

Product Feature:

Cable mouth base can be switched, from the original 17 cable mouth (4 branch ports forφ14-22mm; 12 branch ports forφ8-16mm;1 uncut ports range is 10-25mm) switch to 10 cable mouth (7 branch ports forφ8-17.5mm;2 soft cable ports availible for differente specification of soft cable ;2 cable inlet and outlet can be used for different specifications of cable;1 uncut cable port range is 10-22mm).

GPJ09-5817-A dome joint box has a maximum capacity of 144 cores, GPJ09-5817-B dome joint box has a maximum capacity of 360 cores, and GPJ09-5817-B dome joint box has a maximum capacity of 720 cores.

GPJ09-5817-A dome joint box can be equipped with 12 *12F or 24* 6F trays, GPJ09-5817-B dome joint box can be equipped with 30* 12F or 60 *6F trays, GPJ09-5817-C dome joint box can be equipped with 60 *12F trays.

The outer box body is made of modified polymer plastic, and the sealing ring is made of vulcanized silicone rubber, which has high strength and corrosion resistance, and can extend the service life of the product.

Fiber tray can be replaced with optical fiber divider, each optical fiber divider can be installed with 2 *1:4 and 1* 1:8 micro splitters.

A variety of fiber trays can be selected to meet the requirements of splicing and installation of splitter.

Unifiber, a Hi-Tech company specialized in developing and manufacturing optical fiber products. Based on strong hardware development, we are offering the most cost-effective cabling solutions on optical networking, data center, FTTx and OEM solution.

Our featured products includes FTTA Waterproof Connectors, indoor/outdoor armored cable assembly, Pre-terminated Multifiber Cables, FTTH flat drop patch cable, LC Uniboot, 6~12 fiber pigtails and MTP/MPO series. We can also provide adapter, attenuator, fused coupler, PLC Splitter, WDM and various of patch panel, terminal box, ODF and tool series products..

Providing the highest quality products and services is always the most important principle to Unifiber, All our products are subjected to strict test according to BELLCORE standard and fully RoHS compliant. Through the efforts of our team, Unifiber has obtained a widespread acknowledgement, Our products continue to enjoy growing acceptance both in China and abroad.