High Precision Stud And Track Roll Forming Machine With Presser Punching

Roll forming machine with presser punching in Australia ceiling design, decorative panel

Application:

This production line has been designed to produce metal wall or sandwich panels with PU or Polyurethane insulated and various decoration patterns embossed, engraved or printed on the metal face.

This profile is widely used all around the world.

Quick Detail:

1. Thickness : 0.8-1.2mm
2. Material : G350 PPGI
3. Input width : 680mm
   1. Effective width: 599mm
   2. Material weight : 3Tons
   3. Coil inner diameter : 480mm
   4. Driven way: by 5.5Kw driven motor
   5. Cutting way: after cut-off, there is waste
   6. Cutting tolerance : ±1mm

Machine list:

1. Hydraulic Un-coiler with pre-leveling device
2. Hydraulic punching or presser to be provided by the buyer
3. Roll forming machine
4. Hydraulic cutting device
5. Run out rack
6. PLC control system

Description/Technical Parameter details of complete line:

• Hydraulic Un-coiler with pre-leveling device

Hydraulic system to expand coil inner hole, four palms

Motorized driving coil rotation, auto stop/start control, 3KW

Load capacity=3Ton

Coil width: 700mm

Coil Inner-diameter: Φ510±30mm

Coil Outer-diameter Max. Φ1200mm

Snabber arm driven by pneumatic cylinder

Pre-straighten device with 7 shafts, four over three

Solid shaft Φ60, made from GCr15, hart chrome-coated

Four pneumatic cylinders to press the sheet

Max. line speed: 15mpm

Air source to be provided by the buyer

• Roll forming machine details as below table :

• Hydraulic Cutting Device

Stop to cut, Post cut, Slug Breaker

Cutting tool material: Cr12, Heat treatment

Total one set of cutting blades

Hydraulic power pack, Pump motor =4KW

• PLC Control System

Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder

Cut-to-length tolerance≤±1mm

Control Voltage 24V

• Product Rack Un-powered, rolled type, 4 meter long

Profile Drawing/Layout/Equipment reference pictures:

NKH Machinery is an experienced manufacturer of a wide range of roll forming machines, such as panel/roofing tile /purlin /ridge cap /pipe/ metal deck lines/cut to length & recoiling lines/ crimping/curving machines/folding machines, etc.

Over 10 years of experience has allowed us to become aware of and to incorporate the best practices from around the World. It has allowed us to develop our company’s awareness of the importance of design, performance and quality standards in all aspect of the development and delivery of modern roll forming lines.

Excellence is our expectation. A consistent commitment to quality is something we maintain throughout every level of our organization and every individual within it. Whether working in parts or assembly, service or sales, each member of the NKH machinery team participates in the development process of each machine we create. We will meet your high standards by taking full advantage of the experience, creativity, and wisdom each member of our team has to offer. Our overall goal is to ensure the best possible outcome for you, assisting you in generating profits that are well-worth your investment with a NKH Machine.

We are ready to meet you anywhere in the world to discuss your roll forming requirements and you are welcomed to call Our Sales Team to take your initial enquiry.