Electric Out Sliding Plug Automatic Bus Door , Patent Protected Bus Door Systems

Product Name:Driving with leading screw patent protected electric out sliding plug door for LRV or metro

1. The main features :

• Smooth motion. It combines the linear bearing’s sliding and roller bearing’s rolling mechanism to accomplish the sliding and swinging motion during the door open and close. It also utilizes rotating columns to balance the upper and lower part of door panel plugging motion;
• High safety. It utilizes the over-center auto locking to make sure that the door will not open accidentally. The door will be locked even tighter if pushed by passenger. It also utilizes the pressure wave sensitive edge combined with current measurement as secondary sensitive edge;
• High reliability. Power driven swinging motion for the smooth door movement;
• Energy Saving. Swinging and sliding driven by single motor for power efficiency;
• Superior sealing. It insulates noise from the outside and reduces the energy loss of the air conditioner;
• Sleek outlook. The outlook is very clean by using the curve-matched door panel and the inner sealing.

2. Mechanism :
The door system consists of mechanical system and electrical system. Mechanical system includes door operator, door shaft and door panels. The electrical system includes power supply and controller. The door operator consists of driving mechanism, plugging mechanism, hanging mechanism, guiding mechanism, and locking & unlocking mechanism.

• Driving mechanism includes DC motor and multi-head ball screw to achieve smooth motion and high reliability. The DC motor is connected to shaft connector, gear box, ball screw and driving nut in order. Driving nut is then connected to the door hanger and door panel. The door panel is horizontal sliding as long as ball screw rotates;
• Plugging mechanism includes fix plate, moving plate, rotating shaft, plug driving rod, plug following rod. Hanging system includes hanger and guide rod. Hanger is connected to the door panel and meanwhile is also connected to the guide rod through the linear bearing. Therefore the weight of door panel is transferred to the guide rod, which is installed on the moving plate. When motor rotates, it drives the rotating shaft to rotate through planetary gear box. The rotating shaft then drives the plug driving rod to rotate. It makes the moving plate move in and out by using connecting rod and sliding block mechanism. Because the door hanger is also installed on the moving plate, the door panel can be driven in and out to achieve the plugging motion;
• Guiding mechanism consists of upper guide track and lower guide track. Upper guide track is installed on the fix plate. When the door panel moves, the roller installed on the hanger will rotate around the guide track. The lower guide track is installed on the lower inner part of the door panel. The lower roller installed on the swing arm is also rotating around the lower guide track when the door panel is sliding. The sliding motion and plugging motion are controlled by roller and guide track mechanism;
• Locking and unlocking mechanism includes rotating shaft, plug driving rod, plug following rod, unlocking disc, and emergency handle. When motor runs, it drive the rotating shaft to rotate through planetary gear box and then drive the plug driving rod and plug following rod to rotate. The moving plate is locked since the plug following rod is rotated over pivot center. The door panel is locked since it is connected to the door hanger and then to the moving plate. The emergency handle is connected to the unlocking disc directly or through cable. When emergency handle is activated, the unlocking disc which is fixed on the rotating shaft will rotates. As soon as the rotating shaft rotates on the opposite direction, it will drive the plug driving rod and the plug following rod out of over-center. The moving plate and the door panel are unlocked;
• The electrical door control system (EDCU) is developed by Ivy itself. EDCU controls the door movement by getting orders from vehicle. The function of EDCU is to control individual door movement and communicate with other EDCU. The bus connection such as MVB, Ethernet or CAN service is available per car builder’ s request. In order to achieve the high reliability of the EDCU, all the electrical key components are imported;
• The sensitive edge system is part of electrical system. When the sensitive edge installed on the door panel hits the obstacle during the closing, the door panel will start to open to avoid pinching. The function is achieved by two ways. The first is achieved by pressure wave switch which is connected to the door panel rubber seals and the second one is achieved by checking the current reaction from the motor.

  The door system consists of mechanical system and electrical system. Mechanical system includes door operator, door shaft and door panels. The electrical system includes power supply and controller. The door operator consists of driving mechanism, plugging mechanism, hanging mechanism, guiding mechanism, and locking & unlocking mechanism.

• Main Parameters:

• Operation Temperature	-40°C - 60°C
  Operation Voltage	DC110V or DC24V
  Motor Power	100W or 150W
  Minimum Life Cycle	1,500,000
  Door Closing or Opening Time	1.5 – 3.5 Seconds
  Style	Single or Double

• ​Ivy Machinery Main Products:
• 
  

  SG300 & ESG300 slide-glide door system for city bus,

  SG400 & ESG400 BRT slide-glide door system for city bus or low floor BRT Vehicles,

  BP300 electrical bridge-plate ramp for low floor bus,

  ER300 electrical rotary door system for mini-bus,

  NR300 pneumatic rotary door system for coach bus,

  ESW300 electrical swing door system for school bus,

  NOSP300 pneumatic outside sliding plug door system for high end bus,

  PF300 platform safety door for BRT bus stations.

  
  

  Ivy’s main rail products :

  EOSP300 electrical outside sliding plug door system for Metros or LRV,

  EOSP330 electrical plug door system for low floor trams,

  EIS300 electrical inside sliding door for Metros or LRV,

  EOS300 electrical outside sliding door for Metros or LRV,

  BP200 manual bridge-plate for low floor trams,

  PF400 platform door system for rail stations.

Ivy is a foreign investors-owned enterprise for the development and mass production of vehicle & platform automatic door systems. Located in Nanjing Software Zone Jiangpu Technology Park, It is built to supply world-class equipments to the fast growing public transportation industry. It owns the capacity to supply 20,000 sets of automatic door system annually.

Founded in 2004, it has become a main automatic door manufacturer in Asia. Its main customers include Qinghua Tongfang, CSR Puzheng Rail Rolling Stock Co., Volvo Bus, Yutong Bus Co., Ltd, BYD, Neoplan China, Changan Bus, FAI Bus and Coach Co., Ltd, Chengdu Bus Co. and so on. Since 2006, Ivy door systems and other auto and industrial components have been exported to the U.S., Canada, Australia, Germany, Indonesia, Thailand and other countries.

Its main products, win the Best Component Award in 2005, 2007, 2011, 2013,2018 National Bus Competition in China. Ivy gets the ISO 9001-2000 certified in 2006, gets ISO/TS 16949:2002 in 2009, and get ISO14000 and 18000 in 2011. Ivy gains competitive advantage by supplying innovative and reliable products. It owns more than forty patents in the automatic door industry. All Ivy new products have to pass function, durability, and environment tests.

After several years’ researches, Ivy has developed doors for railway platform and railway trains. With its patented key technologies such as two-directional driving mechanism, over-center locking and synchronous mechanism, Ivy has gain more and more recognitions in rail industry. Ivy will contribute itself to the public transportation industry by supplying safe, reliable , energy saving and cost effective products to our customers.

Mission Statement

To be a customer-driven company, delivering customer with high quality and unique products through innovative technology and continuous operation improvement to grow and share benefits with our customers, employees and shareholders.

Main Products 

Ivy’s main bus products include：

SG300 & ESG300 slide-glide door system for city bus,

SG400 & ESG400 BRT slide-glide door system for city bus or low floor BRT Vehicles,

BP300 electrical bridge-plate ramp for low floor bus,

ER300 electrical rotary door system for mini-bus,

NR300 pneumatic rotary door system for coach bus,

ESW300 electrical swing door system for school bus,

NOSP300 pneumatic outside sliding plug door system for high end bus,

PF300 platform safety door for BRT bus stations.

Ivy’s main rail products include：

EOSP300 electrical outside sliding plug door system for Metros or LRV,

EOSP330 electrical plug door system for low floor trams,

EIS 300electrical inside sliding door for Metros or LRV,

EOS300 electrical outside sliding door for Metros or LRV,

BP200 manual bridge-plate for low floor trams,

PF400 platform door system for rail stations.