Surge lightning arrester indoor power protector device 220v surge protector

Surge protector , surge protection , multifunctional lightning protector

Product Details

Surge protector is a lightning protection measure adopted by Zhejiang toer Electric Co., Ltd., which is independently developed and produced for electrical system. It is suitable for AC 50/60Hz, TT, TN-S, TN-C, IT and other power supply systems with rated operating voltage 220V/380V, and factory low voltage power and control system, indirect lightning and direct lightning influence or other transient overelectricity. Surge protection is mainly applied to surge protection requirements in residential areas, third industries, mining and industrial enterprises.

Product features

1. built-in overheating and temperature control circuit breaker

2. alarm indicating device, normal (green), red (fault).

3. core components are strictly screened, stable performance and reliable operation.

Use of attention

1. when installing, attention should be paid to cables coming in and out of surge protective devices, so as to avoid the two coupling of surge.

2. the protected equipment must have good grounding, and the grounding impedance is in accordance with the relevant national standards.

3. this product needs no special maintenance. The lightning arrester should be checked regularly, especially in the thunderstorm season and the whole thunderstorm period. When the system fails to doubt the lightning arrester, the lightning arrester can be dismantled and rechecked. If the system is restored to normal after the restoration to the state before use, it indicates that the lightning arrester has been damaged and must be replaced immediately.

Product specification

Working principle of product

The function of surge protector is to limit the transient overvoltage to the power line, the signal transmission line in the voltage range that the equipment or system can bear, or to inflow the powerful lightning discharge into the ground, and protect the protected equipment or system from damage by the impact.

Company profile

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.