Beyondopto Contact Closure over Fiber series support 1~16 Channels
simplex or 1~8 Channel duplex contact closure over one multi-mode
or single-mode optical fiber. These fiber optic transmitter and
fiber optic receiver are typically used in applications with Access
Control System, Alarm Event Triggering, Building Automation and
Environmental Control Systems, Fire & Alarm Systems, PIR signal
Transmission, Traffic Signal Control Equipment, etc, and are
available for stand-alone or rack-mount installations. FC, ST or SC
optical connectors is optional.
Plug and Play design ensures adjustment-free installation and
operation, and optical adjustments are never required. LED
indicators are provided to instantly monitor the system operating
status. Features • Support Point-to-Point or Daisy-Chain connection
• Dry Contact Closure or TTL data over one fiber
• Multimode Fiber Support for Distances up to 4 km
• Single-Mode Fiber Support for Distances up to 100 km
• LED Status Provide Rapid Indication of Operating Parameters
• No EMI or RFI and no ground loops
• Stand alone or rack-mount
• Produce according to customer's specifications,providing OEM Beyondopto Fiber Optic Transmission Systems can transmit audio,
data, alarm and ethernet signals, Our Fiber Optic Integrated
Platform is A System Designed By You - For You. No matter how
complex your system is, you just give your request to us, We will
give you a satisfactory solution and design diagram. Specifications Opitcal:
Wavelength | 1310nm&1470nm~1610nm | Output Power | -14~ -8dBm / -5~0dBm | Optic fiber | 50/125u multimode,62.5/125u multimode,9/125u single mode | Rx sensitivity | -30dBm | Optical connector | FC,ST,SC (optional) | Distance | 0~2KM (MM) / 0~120KM (SM) |
Contact Closure:
Connector | Standard terminal lead | Signal input | alarm, Binary input, support TTL,RS-232/422/485 or passive Contact
Closure | Signal output | Arbitrary alarm, Binary output, support TTL,RS-232/422/485 or relay
output |
Data | Data protocol | RS232,RS422,RS485,Manchester,BIPHASE data | Data rate | 0~500 Kbps | Error rate | < 10-9 | Connector | Standard terminal lead |
Audio | Input/output Impedance | 600ohm(unbalance) | Max input/output voltage | 3.0Vp-p | Frequency Response | 10 Hz～29kHz @±3dB | SNR | > 70dB | Connector | Standard terminal lead |
Electrical & Mechanical | Input Power Requirements: | DC 5V@2A | Power Adapter: | AC 90V~240V | Power Consumption: | < 3W | Stand-Alone Dimensions: | 183mm × 154mm × 30mm | Shipping Weight: | (include Transmitter & Receiver ) 1.5kg |
Environmental | Operating Temperature: | -20°C ~ +75°C | Storage Temperature: | -40°C ~ +85°C | Relative Humidity: | 0% ~ 95% (non-condensing) | MTBF: | >100,000 hours |
Ordering Information & Optical Specifications
Model | Fiber Mode | Connecter | Alarm Channel | Optical Power Budget | Max Transmission Distance | Transmitter | Receiver | BAT0002K | BAR0002K | SM | FC/ST/SC | 2 | 18dB | 25km | BAT0004K | BAR0004K | SM | FC/ST/SC | 4 | 18dB | 25km | BAT0008K | BAR0008K | SM | FC/ST/SC | 8 | 18dB | 25km | BAT000HK | BAR000HK | SM | FC/ST/SC | 16 | 18dB | 25km |
Note:
• The Optical Power Budget data fit Mulit-mode(62.5/125
μm),Single-Mode(9/125 μm).
• When using 50/125 μm multimode fiber, subtract 3 dB from the
optical power budget.
• Optical transmission distance is limited to optical loss of the
fiber and any additional loss introduced by connectors, splices and
patch panels.
• Maximum transmission distance is also limited by fiber bandwidth.
• Power adapter is manufactured by third party and is supplied with
fitted screw-terminal output cables.Power adapter included (for
standalone) US, European, UK or Australian power plug.
• Please feel free to consult factory for any special requirement
and customization. • Due to continuous improvement, all fiber optic transmission
systems and video over fiber product specifications are subject to
change without further notice. |
Dry/wet contact closure over fiber converter,alarm/TTL/ dry Contact Closure input, relay output to fiber optical convert
