| Supported OS | - Windows 7/8/8.1/2008/2008 R2/2012 (x86 & x64)
- Linux (V4L2 kernel driver source code under NDA, supports x86, x64
& arm architecture)
|
| Supported APIs | - Windows
- DirectShow
- DirectKS
- Wave API/DirectSound/WASAPI
- Linux
|
| Supported Software | - VLC
- VirtualDub
- OBS
- xSplit
- vMix
- VidBlaster
- Wirecast
- Microsoft Media Encoder
- Adobe Flash Media Encoder
- Any other DirectShow/V4L2 encoding/streaming software
|
| Input Interfaces | - DVI-I
- DVI 1.0
- HDMI 1.4a (via breakout cable)
- VGA (via DVI2VGA connector)
- Component (via breakout cable)
- DB9
- YC (S-Video)
- Composite video
- Analog audio (L+R)
- Component video
- BNC
|
| Output Interfaces | |
| Input Features | - Auto scan of video input sources when there is no signal input to
the currently selected input source
- Manual selection of video input source
- Auto selection of linked (embedded) audio input source when the
video input source changes
- Manual selection of audio input source
- Support for standard crossbar based on video input source selection
- Support for input video resolutions up to 2048×2048 pixels
|
| VGA & Component Specific Features | - 12-bit ADC
- Support for RGB & YCbCr (YUV) color formats
- Support for ‘Seperated sync’, ‘Composite sync’, ‘Sync-on-green’
(SOG), ‘Sync-on-luminance’ (SOY)
- Support for DMT, CEA, CVT, GTF video timings
- Input signals up to 165MHz pixel rate are digitized with 1:1
sampling
- Input signals over 165MHz pixel rate can be digitized with
horizontal sub-sampling (resulting in some image quality loss – NOT
officially supported)
- Auto detection of RGB & YCbCr color formats
- Auto or manual sampling phase adjustment
- Auto horizontal alignment
- Support for customized video timings
- Support for customized video resolutions for CVT/GTF timings
|
| HDMI Specific Features | - 225MHz HDMI receiver
- Adaptive HDMI equalizer support for cables lengths up to 30M
- Support for customized EDID
- Support for extraction of AVI/Audio/SPD/MS/VS/ACP/IRSC1/ISRC2/Gamut
InfoFrames
- Full colorimetry support
- Support for 8/10/12-bit color depths
- Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
- Support for up to 8-channel IEC60958/IEC61937 audio streams
- Support for extraction of audio formation information & channel
status data
- Support for extraction of video timing information
- Support for extraction of 3D format information
- Support for extraction of Sony/Canon DSLR time code
|
| SDI Specific Features | - Integrated cable equalizer supporting cable lengths up to 230M for
HD signals
- Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS standards
- Support for 2K (2048×1080) mode
- Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
- Support for 10/12-bit color depth
- Support for extraction of SMPTE 352 payload identifier
- Support for up to 8 audio channels at 48KHz
- Support for extraction of audio formation information & channel
status data
- Limited support of 3Gb-DS: only the first stream can be captured
- Limited support of 3Gb-DL:
- 2K YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i
50/59.94/60
- Other modes: full supported
- Limited support for capture of the first link of dual link
interfaces:
- YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60
- YCbCr 4:4:4 10-bit: captured as 4:2:2
- RGB 4:4:4: R/B sub-sampled
|
| YC & Composite Specific Features | - 12-bit ADC
- Support for NTSC, PAL and SECAM standards
- Auto detection of video input standard
|
| Video Output Formats | - Support for output image resolutions up to 2048×2048 pixels
- Support for output frame rates up to 120fps. (Actual output frame
rate can be limited by PCIe bandwidth, and at higher image
resolutions – above 1280×1024 – by the pixel clock of the on-board
video processing hardware. eg. Max frame rate at 1920×1080 =
~80fps. )
- Support for 4:2:0 8-bit output formats: NV12, I420, YV12
- Support for 4:2:2 8-bit output formats: YUY2, YUYV, UYVY
- Support for 4:4:4 8-bit output formats: V308, IYU2, V408, BGR24,
BGR32
- Support for 4:4:4 10-bit output formats: V410, Y410
- More output formats are supported via Pro Capture SDK for DirectKS
|
| Video Processing Features | - Two video processing pipelines with ~180Mpixels/s processing
bandwidth for each one
- Full 10-bit video processing
- Video cropping
- Video scaling
- Video de-interlacing
- Wave
- Blend top & bottom field
- Top field only
- Bottom field only
- Video aspect ratio conversion
- Auto or manual selection of input aspect ratio
- Auto or manual selection of output aspect ratio
- Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping
or Padding (Letterbox or Pillarbox)
- Video color format conversion
- Auto or manual selection of input color format & quantization range
- Auto or manual selection of output color format, quantization range
& saturation range
- Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
- Support for Limited or Full quantization range
- Support for Limited, Full & ‘Extended gamut’ saturation range
- Video frame rate conversion
- Video OSD composition
- Support for PNG OSD image (up to 2048×2048)
- Support for dynamic loading of RGBA OSD image via SDK
|
| Multiple Cards per System | - Support for multiple cards plugged to one system
- On-board rotary switch to set card number, with 16 positions from 0
to F
- System hardware device tree will display “01: Pro Capture AIO” when
rotary switch is set to 1, and so on
- The video and audio device names displayed in your software will
include the card number (set by the rotary switch)
|
| Multiple Output Streams | - Unlimited output streams for any one input channel
- Independent cropping, aspect ratio, color format, resolution, frame
rate, de-interlacing and color adjustment settings for each
individual stream
|
| Ultra Low Latency Support | - Latency of 64 video lines
- Partial notification mode in SDK
|
| Timestamp & A/V Synchronization | - Hardware based 100ns high resolution clock
- Audio frames (192 audio samples) & video frames are stamped with
hardware clock
- Hardware clock can be synchronized across cards (via SDK)
|
| Video Output SG-DMA | - ~400MB/s per channel DMA bandwidth in PCIe 2.0 system
- ~200MB/s per channel DMA bandwidth in PCIe 1.0 system
- Support for auto detection of Intel tiled GPU surface
- Support for DirectGMA for AMD video adapter chipsets
- Support for GPUDirect for Nvidia video adapter chipsets
|
| SDK | - Pro Capture SDK for DirectShow for easy integration (Windows)
- Pro Capture SDK for DirectKS for maximum flexibility & performance
(Windows)
|
| Windows Driver Tweaks | - All options can be controled by three levels of registry key:
global level, product level and device level
- Video, Audio, Crossbar filter names can be customized via registry
keys
|
| Firmware Upgrade | - Multiple cards in one system can be upgraded simultaneously
- Cards can be upgraded without a system power shutdown (In most
cases, even a reboot is not needed)
|
| LED Indicator | - Status LEDs indicate the working state of each channel: idle, input
signal locked, memory failed or FPGA configuration failed.
|
| Form Factor | - Normal profile PCIe x1 Add-on Card
- 92.76mm x 96.24mm (without PCI bracket)
|
| Accessories | - DVI2VGA connector
- DVI-I to HDMI + Component breakout
- DB9 to YC + Composite + Analog Audio + Component breakout
|
| Power Consumption | - Max current at 12V ~0.4 A
- Max current at 3.3V ~0.3 A
- Max power consumption ~5.4 W
|
| Working Environment | - Operating temperature: 0 to 40 deg C
- Storage temperature: –20 to 70 deg C
- Relative Humidity: 5% to 90% non-condensing
|
Full HD 1080P PCIe HDMI Video Capture Card
