Digital Weighing Transmitter A2P+

Digital weighing controller-A2P+

Weighing Controller​ Main Function:

¨ use panel to set parameters and calibrate.

¨ display weight and zero function

¨ error alarm for wrong operation and indicator error.

¨ 4~20mA output, can set the weight value of 4mA and 20mA

¨ low, medium and high fixed value control output, can arbitrarily

each control value and buffer value.

¨ RS232. RS485

2. Weighing Controller Technical Data

2.1 A/D sampling rate: 7.5 times/s~240times/s available

2.2 inner resolution ratio: 24bits

2.3 non-linearity: ≤0.005%F.S

2.4 Temperature effect on zero: ≤0.2μV/℃

2.5 Temperature effect on output: ≤10ppm/℃

2.6 input signal range of the full capacity : 2~20mV

2.7 initial weight signal range: -1~+9mV

2.8 output of input signal 0.5uV /d(min.)

1.5uV/d(advise)

2.9 zero range: 100%FS

2.11 display: 6 red digits (character heighth 14mm)

2.14 working environment temperature: -5℃~ 45℃

2.15 Humidity ≯ 90%(no condensation)

2.16 Power supply: +18 ~ +24 VDC,0.5A

2.17 Power supply for load cell: DC 5V, can connect 4 load cells of

resistance not less than 350Ω

INNOVATION ELECTRONIC CO.,LTD. belongs to INNOVATION GROUP. 

Innovation Group include Innovation Electronic and Innovation Automatic. 

Innovation Electronic focus on providing most comprehensive solution in WEIGHING AND FORCE TEST INDUSTRY. Weighing PRODUCTS include: kinds of load cells: Mini load cell, shearbeam load cell, canister compression load cell, load pin, force sensor, single point load cell in aluminum and stainless steel, double ended load cell, button load cell, tension load cell, s type load cell, torque sensor based on strain gauge, etc. 

The Weighing controllers and weight transmitter including: Batching scale controller, weiging indicator, force test weighing indicator, weighing controller, weighing controller for combination weigher, PACKING SCALE, check weigher, LINEAR WEIGHERS,truck scale, etc.