Single Row 180 Degree Wafer Connector 4.2mm Pitch Without Foot

1, Detailed specification of product:


1. Basic information:

• Color: White
• Housing Material: Nylon66
• Flammability: 94V-0/2
• Pin material: Brass or tin-plated
• Pitch: 4.20 mm
• Circuits: 2,3,4,5 positions
• Insulation O.D.: 3.10mm
• Terminal materials: Phosphor bronze/Brass
• Finish terminal: Tin-plated type

2. Electrical characteristic:

• Current Rating: 9A AC DC
• Voltage Rating: 600V AC, DC
• Contact Resistance: 10mΩ Max
• Insulation Resistance: 1000MΩ
• Withstanding Voltage: 1500V AC/minute

3. Mechanical characteristic:

• ​​Temperature Range:-25°C ~+85°C
• Terminal Insertion Force: 1.50kgf (Max.)
• Terminal/Housing Retention Force: 3.00kgf (Min.)
• Pin Retention Force: 3.00kgf (Min.)
• Latch Yield Strength:7.0kgf (Min.)
• Panel Mount Retention Force: 16.0kgf (Min.)

2, Introduction for this series products

3, Related drawing and testing report
The attached picture is our standard engineering drawing and report for your reference, it will help you to
know our product feature, then you can choose the right models.

Mechanical Performance

Test Description		Procedure	Requirement
5-1	Actuator Insertion & Withdrawal Force	Insert and withdraw connectors at the speed rate of 25±3mm / minute.	Refer to paragraph 7
5-2	Crimping Pull Out Force	Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8)	AWG#14	11.0kgf (Min)
			AWG#16	10.0kgf (Min)
			AWG#18	9.0kgf (Min)
			AWG#20	6.0kgf (Min)
			AWG#22	4.0kgf (Min)
			AWG#24	3.0kgf (Min)
5-3	Terminal Insertion Force.	Insert the crimped terminal into the housing.	1.50kgf (Max.)
5-4	Terminal/Housing Retention Force.	Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing.	3.00kgf (Min.)
5-5	Pin Retention Force	Apply axial push force at the speed rate of 25±3mm / minute	3.00kgf (Min.)
5-6	Latch Yield Strength	Mate connectors and pull apart until both latches break at the speed rate of 25±3mm / minute	7.0kgf (Min.)
5-7	Panel Mount Retention Force	Insert the housing into panel cut out, push housing opposite the way it was assembled until the locking barbs break at the speed rate of 25±3mm / minute.	16.0kgf (Min.)
5-8	Durability	When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute.	Contact Resistance 20mΩ (Max.)
5-9	Vibration	Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A)	Appearance No Damage. Contact Resistance 20mΩ (Max.) Discontinuity 1 μsec.(Max.)
5-10	Physical Shock	490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JISC0041/MIL-STD-202 Method 213B Cond. A)

12-year Experience of Manufacturing Connectors
Established in 2004, Xinpei is your reliable supplier for most of connectors. Our products are widely trusted by reputable and famouse manufacturers of household appliances, computer peripherals, medical equipment, locomotives, telecommunication device and other relative field.

Offering One-stop Sourcing Solutions for International Buyers
At our ISO 9001:2008 certified factory in Dongguan, mainland China, we make UL-listed goods by using automatic equipment for uniform product quality. By our integrated molding, mass production and assembly services are carried out by 100 skilled workers and the professional account executive can offer an one-stop sourcing solution to all international buyers.

Advanced Machines from Japan and Taiwan
We use advanced machinery from Japan and Taiwan to guarantee efficient and precise manufacturing. We have a commitment in delivering superior quality products at competitive prices.

Our advantages are as following:

• We offer complete end-to-end customized manufacturing solutions
• We have four mechanism engineers to refine your design for production
• We skillfully use AutoCAD, SolidWorks and Pro/E software to design your customized project
• Our materials are sourced from Switzerland, Japan and Taiwan
• Reputable manufacturers like Amphenol and AOC trust and cooperate with us for many years
• We own advanced inspection equipment like X-ray testing machine, high pressure testing machine projector, fully automatic tension meter, salt spray testing machine, insulation pressure testing machine and 3D optical image measuring testers to ensure the highest quality possible
• We accept small quantity orders
• Reply inquiries within eight hours
• We have more than 15 years of experience in handling OEM and ODM orders

Contact Us Now
We are looking forward to establishing long-term business relationship with you in the near future. So please inquire to us today and receive our fast reply within eight hours.