Long Electricity Pole Welding Machine Hydraulic Clamp Section Use SAW Welding

Long Electricity Pole SAW Welding Machine with Hydraulic Clamp the section and SAW

Electricity pole was widely used in the world. It is very strong and beautiful compared to the cement pole. In power grids project, Electricity steel rod in place of cement pole is a larger project.

Our factory is specially in producing the pole clamping and welding machine. The pole was widely used in the city and road.

It is suitable for one piece type polygonal and circle taper light pole. it is

automatic welding line, the dolly with speed adjustable motor can pull (or push) the

light pole from small end to big end, The hydraulic cylinder through mechanical

chain, Worm wheel push the clamping wheel to close the pole and do welding at the same time.

Type : Diameter 450 mm

Light Pole effective length :12000 mm

Welding type: Submerged Arc Welding / Gas- shielded welding(CO2) Welding both function ,We will produce according to your requirements.

The machine includes the following items :

• Long working table with rack for pull dolly.
• Dolly for pulling pole
• Hydraulic clamping and welding unit (including 3 sets clamping wheels for
• polygonal and circle pole)
• Submerged Arc Welding and Gas-shielded welding(CO2) Welding system,
• including welding wire feeding system.
• The flux recovering system
• back support unit
• hydraulic system

Technical Parameters

Lincoln welding machine (USA BRAND)

Note:, If chose the Lincoln welding machine,normally it is suitable for Submerged Arc Welding

process

Fast motorized return back for dolly

Note:for the standard machine, the dolly return back can be motorized with working speed, it is very

slow for return back process. So, normally, the operator will open the dolly clutch and push the dolly

by manual.

In order to reduce the manpower, we have option: Fast motorized return back for dolly. The operator

only push button, the dolly will be back to the welding head.

See attached detail photos.

Both Side additional hydraulic cylinder

It is suitable for small diameter big thickness light pole, or steel plate with high tensile strength light

pole.

With this additional option , the diameter from 60~450mm, thickness 2.8~6mm, all pole can be

suitable. And easy for operation.