CNC Hydraulic Press Brake Machine With LCD display

1 The frame of machine is composed of tank, worktable, left and right housings and ram. So it has high strength and good rigidity. Also it takes vibration to eliminate stress.
2 Synchronization working principal of both machines:Adopting electric-hydraulic proportional valve to ensure the synchronization of both machines. The proportional valve is made by BOSCH company with very good performance such as small friction between mechanic action pairs, fine electronic amplifier and electric magnet with high controlling force and continuous action. There are two raster displayers on both sides of machine to inspect the position of ram continuously and feed back the signal to control system, then the control system will control electric-hydraulic valve to make two cylinders synchronization on one machine. Because the raster displayers are installed to “C” plates, not on housing plates directly, the deflection of ram and frame when working will not effect its measuring and controlling precision. When two machines working together, the differential potentiometer installed between two machines will transfer the mechanic synchronizing signal into electronic one and feed back to synchronization plate and control system. The signal will be enlarged by BOSCH amplifier to control the synchronization of both machines by controlling electric-hydraulic proportional valve. So the synchronization of two machines is achieved with high precision.
3 Through computer,the operator could communicate with machine. The computer has several service language, calculate and adjust the bending force automatically. Also it could calculate and control the dead point, speed changing point.The strokes (Y1, Y2) of ram could make a small tilt to meet the special requirement of user.
4 Equipped with good guiding system, position measuring system and hydraulic balance system to meet the requirements of full length job and eccentric job.
5 Worktable compensation unit is adopted to make up for deflection of machine when working to make sure the precision of work piece.
6 The surface of cylinder has good wearing and heat treatment, so it has good lubrication and long service life.

Wuxi CMC machinery Co., Ltd. is located in Wuxi city, Jiangsu province, near to Shanghai, which is specializing in designing, manufacturering, supplying and service of light pole machines.

Our company has own unique technology and good customer base in the development and production of light pole machines complete line. Our main products include cut to length line, CNC tandem hydraulic press brake, base plate welding machine, CNC light pole door cutting machine, high mast assembly & straightening machine, CNC portable flame cutting machine, gantry type welding machine for high mast, steel plate slitting machine, light pole shut-welding machine, hot dip galvanizing equipment and so on.

Our self-developed cut to length line, output from steel coil to isosceles trapezoidal plate directly. It has high automation, fast speed, and obtained the national new practical patent. Based on CNC tandem hydraulic press brake, we have made many improvements, making the machine especially suitable for the rapid and efficient production of light poles. To meet customer demands, we developed CNC light pole door cutting machine, base plate welding machine, automatic double / four head drilling machine, high mast automatic welding machine, etc. We continuously optimize and improve our products to meet the light pole industry. It greatly changes the situation of manual work and improve the quality and efficiency of light pole production.    

More than 80% of our products are exported to overseas markets, such as Thailand, Malaysia, India, the United Arab Emirates, Mexico, Brazil, Russia, Latvia, Kazakhstan, Algeria, Egypt, Ethiopia, the Middle East, etc.

Our engineers have rich installation and commissioning experience, good English communication skills, technical talent and remote service ability to help our oversea customers to solve problems efficiently. 

After years of running, we have become a team with innovative working habits and close cooperation concept, holding the key technology of light pole machines, growing up to a 100% trustworthy team.

More than light pole machine produciton, we also set up a joint venture named Jiangsu XinLingYu Intelligent Technology Co., Ltd. in Xuzhou city, Jiangsu province in 2017 year. It fabricates hot dip galvanizing line / equipments, can meet customers' requirements of anti-corrosion treatment for light pole and high mast pole. Based on full industry experience and original hot-dip galvanizing knowledge, we continue to develop and innovate the HDG process. It has reached a very advanced technical level. We have supplied both light pole machines / lines and hot-dip galvanizing lines to multiple customers.

At present, our company runs very stably, has good financial condition and step in a strong growth period.

We hope to establish a good relationship with more customers, develop and make progress synchronous.