| Ratings | Rated Voltage (MAX) | 50V |
| Rated Current (MAX) | 0.5A (AC/DC, 50Hz virtual value) |
| Ambient Temperature Range | -45 to +85 |
| Electrical Performance | Contact Resistance | 20 m MAX (after mating with applicable FPC/FFC, measured by dry
circuit, 20mV MAX, 10mA) |
| Insulation Resistance | 500 M MIN (after mating with applicable FPC/FFC, measured at 500V
DC between adjacent terminals or terminal to ground) |
| Dielectric Strength | No Breakdown (after mating with applicable FPC/FFC, measured at
200V AC virtual value for 1 minute between adjacent terminals or
terminal to ground) |
| Mechanical Performance | Locking and Withdrawal Force | Locking: 1.96*n (N) MAX
Withdrawal: 0.49*n (N) MIN
(For 0.3mm thick FFC, measured at 253mm/minute speed) |
| Terminal/Housing Retention Force | 3.92N MIN (measured by pulling terminal outwards at 253mm/minute
speed) |
| Environmental & Other Performance | Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX (20 cycles at < 10 cycles/minute) |
| Temperature Rise | 30 MAX (carrying rated current load, UL 498) |
| Vibration | Discontinuity: 1 ms MAX (under DC 1mA, 1.5mm amplitude,
10-55-10Hz/min, 2 hours in X, Y, Z axes) |
| Shock | Discontinuity: 1 ms MAX (under DC 1mA, 490m/s {50G}, 3 strokes in 6
directions) |
| Heat Resistance | Contact Resistance: 60 m MAX (96 hours at 852) |
| Cold Resistance | Contact Resistance: 60 m MAX (-402, 96 hours) |
| Humidity | Insulation Resistance: 20 M MIN (96 hours at 402, 90-95% RH) |
| Temperature Cycling | Contact Resistance: 60 m MAX (5 cycles of -452 for 30 min, 852 for
30 min) |
| Salt Spray | Contact Resistance: 60 m MAX (484 hours exposure to 51% salt spray
at 352) |
| SO2 Gas Resistance | Contact Resistance: 60 m MAX (24 hours exposure to 505ppm SO2 gas
at 402) |
| NH3 Gas Resistance | Contact Resistance: 60 m MAX (40 minutes exposure to NH3 gas from
28% Ammonia solution) |
| Soldering | Solder ability (Wetting) | 95% or more wetting area (immersed in 2355 tin bath for 20.5 sec,
0.2mm from terminal tip) |
| Resistance to Soldering Heat | No Damage (immersed in 2605 tin bath for 50.5 sec, 0.2mm from
terminal tip) |
| Part Numbers | AFA07-S**FCC-00 | (Tube packaging, small batch available) |
| AFA07-S**FCA-00 | (Reel packaging, bulk order recommended) |
