| Sign In | Join Free | My futurenowinc.com |
|
| Sign In | Join Free | My futurenowinc.com |
|
| Categories | FFC FPC Connector |
|---|---|
| Brand Name: | AFC07-S24ECC-00 |
| Operating Temperature: | -25℃~+85℃ |
| Voltage Rating (Max): | 50V |
| FFC, FCB Thickness: | 0.3mm |
| Description: | FFC/FPC Connector 24 Position 0.5mm Pitch Top Contact Surface Mount, Right Angle |
| Current Rating: | 400mA |
| MOQ: | 5 |
| Locking Feature: | Slide Lock |
| Pitch: | 0.5mm |
| Packaging Details: | SMD,P=0.5mm,Surface Mount,Right Angle |
| Contact Material: | Phosphor Bronze |
| Delivery Time: | 1工作日 |
| Stock: | 3128 |
| Contact Plating: | Tin |
| Number of Contacts: | 24P |
| Contact Type: | Top Contact |
| Model Number: | AFC07-S24ECC-00 |
| Mounting Type: | Surface Mount, Right Angle |
| Company Info. |
| Shenzhen ECER Network Technology Co., Ltd. |
| Verified Supplier |
| View Contact Details |
| Product List |
Scope: This specification covers the 0.5mm Pitch FPC/FFC Connectors (Series Locking).
Product Name: FFC/FPC Flat Cable Connector
Product Type: 0.5mm Pitch FPC, 24 Positions, H2.0mm, Top Entry, Tape & Reel Packaging, Environmentally Friendly.
| Item | Requirement | Test Condition | Specification |
|---|---|---|---|
| Rated Voltage (MAX) | 50V [AC/DC (Virtual value) 50Hz] | ||
| Rated Current (MAX) | 0.4A | ||
| Ambient Temperature Range | -25+85 |
| Item | Test Condition | Specification |
|---|---|---|
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 20 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. | 500 M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminals or ground. | No Breakdown |
| Item | Test Condition | Specification |
|---|---|---|
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n = number of positions) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal / Housing Retention Force | Pull the terminal at the speed rate of 253mm per minute. | 3.92N MIN |
| Item | Test Condition | Specification |
|---|---|---|
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. (No power) | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | Temperature Rise: 30 MAX |
| Vibration | DC 1mA energized; vibration along XYZ three axes; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/minute; Duration: 2 hours in each X, Y, Z axes. | Appearance: No Damage Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX |
| Shock | DC 1mA energized; along 6 mutually perpendicular directions; 490m/s {50G} shock; 3 times each. | Appearance: No Damage Discontinuity: 1 ms MAX |
| Heat Resistance | Mate applicable FPC/FFC; place in 852 air for 96 hours; then return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Cold Resistance | Mate applicable FPC/FFC; place in -402 air for 96 hours; then return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Humidity | Mate applicable FPC/FFC; place in 402, 90-95% RH air for 96 hours; then measure within 0.5 hours after returning to room temperature. | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN |
| Temperature Cycling | Mate applicable FPC/FFC; 5 cycles of: a) -553 for 30 minutes; b) 852 for 30 minutes; with 10-15 minutes at room temperature and humidity between cycles. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Salt Spray | Mate applicable FPC/FFC; 484 hours exposure to a salt spray from 51% solution at 35 2. Wash with room temperature water after test; then dry at room temperature. | Appearance: No Damage, No Corrosion Contact Resistance: 60 m MAX |
| SO2 Gas Resistance | Mate applicable FPC/FFC; 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX |
| NH3 Gas Resistance | Mate applicable FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Solderability | Dip the terminal tip 0.2mm from the reference plane into a tin bath at 2355 for 20.5 sec. | Solder Wetting: 95% coverage |
| Resistance to Soldering Heat | Dip the terminal tip 0.2mm from the reference plane into a tin bath at 2605 for 50.5 sec. | Appearance: No Damage, No Deformation |
|
