| Sign In | Join Free | My futurenowinc.com |
|
| Sign In | Join Free | My futurenowinc.com |
|
| Categories | FFC FPC Connector |
|---|---|
| Mounting Type: | Surface Mount, Right Angle |
| Contact Material: | Phosphor Bronze |
| Current Rating: | 500mA |
| Contact Plating: | Tin |
| MOQ: | 5 |
| Model Number: | FPC-05F-8PH20 |
| Stock: | 698 |
| Delivery Time: | 1工作日 |
| Locking Feature: | Hinged Lid |
| Contact Type: | Bottom Contact |
| Packaging Details: | SMD,P=0.5mm,Surface Mount,Right Angle |
| Description: | FFC/FPC Connector 8 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃ |
| Number of Contacts: | 8P |
| Pitch: | 0.5mm |
| Brand Name: | FPC-05F-8PH20 |
| FFC, FCB Thickness: | 0.3mm |
| Voltage Rating (Max): | 50V |
| Operating Temperature: | -25℃~+85℃ |
| Company Info. |
| Shenzhen ECER Network Technology Co., Ltd. |
| Verified Supplier |
| View Contact Details |
| Product List |
This specification covers the 0.5mm Pitch FPC/FFC Connectors (series Locking). These connectors are designed for reliable electrical connections with flexible flat cables.
| Item | Requirement | Test Condition | Specifications |
| 3. RATINGS | |||
| Rated Voltage (MAX) | 50V [AC/DC(Virtual value)50Hz] | ||
| Rated Current (MAX) | 0.5A | ||
| Ambient temperature Range | -25+85 | ||
| 4. PERFORMANCE | |||
| 4.1 Electrical Performance | |||
| Contact Resistance | 20 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | |
| Insulation Resistance | 500M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1minute between adjacent terminal or ground. | |
| 4.2 Mechanical Performance | |||
| Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC at the speed rate of 253mm/minute. (for 0.3mm thick FFC) | |
| Terminal /Housing Retention Force | 3.92N MIN | Pull the terminal at the speed rate of 25 3mm per minute | |
| 4.3 Environmental Performance and Others | |||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute (no power). | |
| Temperature Rise | 30 MAX | Carrying rated current load. (UL 498) | |
| Vibration | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX | Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz/min, Duration: 2 hours in each X.Y.Z. axes. (DC 1mA applied) | |
| Shock | Appearance: No Damage Discontinuity: 1 ms MAX | 490m/s{50G}, 3 strokes in each X.Y.Z. axes. (DC 1mA applied) | |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 852, 96 hours (then return to room temp for 1-2 hours) | |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | -402, 96 hours (then return to room temp for 1-2 hours) | |
| Humidity | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours (then measure within 0.5 hours at room temp) | |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60 m MAX | 5 cycles of: a) -553 30 minutes, b) 852 30 minutes (with 10-15 minutes at room temp between cycles) | |
| Salt Spray | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX | 48 4 hours exposure to a salt spray from the 51% solution at 352. (then wash with room temp water and dry) | |
| SO2 Gas | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. | |
| NH3 Gas | Appearance: No Damage Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | |
| Solderability | Solder Wetting: 95% or more | Soldering Time: 20.5 sec. Soldering Temperature: 2455 (0.2 mm from terminal tip) | |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Soldering Time: 305 sec. Soldering Temperature: 2455 (at least 5 times) | |
|
