| Ratings | Rated Voltage (MAX) | 50V |
| Rated Current (MAX) | 0.5A (AC/DC, 50Hz) |
| Ambient Temperature Range | -45 ~ +85 |
| Electrical Performance | Contact Resistance | 20 m MAX (after mating) |
| Insulation Resistance | 500 M MIN (after mating, 500V DC) |
| Dielectric Strength | No Breakdown (after mating, 200V AC for 1 minute) |
| Mechanical Performance | Locking Force | 1.96*n (N) MAX (for 0.3mm thick FFC) |
| Withdrawal Force | 0.49*n (N) MIN (for 0.3mm thick FFC) |
| Environmental Performance | Repeated Insertion and Withdrawal | Contact Resistance 60 m MAX (after 20 cycles) |
| Environmental Performance | Temperature Rise | 30 MAX (carrying rated current) |
| Environmental Performance | Vibration | Discontinuity 1 ms MAX (1.5mm amplitude, 10-55-10Hz/min, 2 hours
per axis) |
| Environmental Performance | Shock | Discontinuity 1 ms MAX (490m/s {50G}, 3 strokes per axis) |
| Environmental Performance | Heat Resistance | Contact Resistance 60 m MAX (after 96 hours at 852) |
| Environmental Performance | Cold Resistance | Contact Resistance 60 m MAX (after 96 hours at -402) |
| Environmental Performance | Humidity | Insulation Resistance 20 M MIN (after 96 hours at 402, 90-95% RH) |
| Environmental Performance | Temperature Cycling | Contact Resistance 60 m MAX (5 cycles of -45 to 85) |
| Environmental Performance | Salt Spray | Contact Resistance 60 m MAX (48 hours at 352, 51% salt solution) |
| Environmental Performance | SO2 Gas Resistance | Contact Resistance 60 m MAX (24 hours at 402, 505ppm SO2) |
| Environmental Performance | NH3 Gas Resistance | Contact Resistance 60 m MAX (40 minutes exposure to NH3 gas) |
| Other Performance | Solder Ability | Solder Wetting 95% |
| Other Performance | Resistance to Soldering Heat | No Damage/Deformation (at 2605 for 50.5 sec) |
