| Current Rated | | 4A AC/DC |
| Voltage Rated | | 250V AC/DC |
| Contact Resistance (Initial value) | Mate connector, max 20mV, max 100mA | ≤ 20mΩ |
| Withstand Voltage | Mate connector, 1000V AC (rms) for 1 min, leakage current ≤ 0.5mA | No breakdown or flashover |
| Insulation Resistance | Adjacent contacts, 500V DC for 1 min | ≥ 1000 MΩ |
| Terminal crimping wire strength (AWG#24) | Axial pullout force, 25 ± 3mm/min | ≥ 30N |
| Terminal crimping wire strength (AWG#26) | Axial pullout force, 25 ± 3mm/min | ≥ 20N |
| Terminal crimping wire strength (AWG#28) | Axial pullout force, 25 ± 3mm/min | ≥ 13N |
| Terminal crimping wire strength (AWG#30) | Axial pullout force, 25 ± 3mm/min | ≥ 8N |
| Fixed terminals and hole seat | Pullout force, 25 ± 3mm/min along wire direction | ≥ 15N (per contact) |
| Single contact insertion force | Housing + terminal with wafer, 25 ± 3mm/min | ≤ 6N |
| Single contact withdrawal force | Housing + terminal with wafer, 25 ± 3mm/min | ≥ 0.6N |
| Pin Retention force | Force on pin end, 25 ± 3mm/min until exit | ≥ 15N (per contact) |
| Durability | 30 cycles (max 10 cycles/min) | Contact Resistance ≤ 30mΩ |
| Vibration | Frequency: 10-55-10 Hz/min, Amplitude: 1.5mm p-p, 2 hrs/axis
(X,Y,Z) | Contact Resistance ≤ 30mΩ, Current Discontinuity ≤ 1μsec Max, No
damage |
| Thermal Aging | 85±2, 96 hours continuously | Contact Resistance ≤ 30mΩ, No damage |
| Temperature Rise | Max rated current | 30 Max |
| Humidity | 40±2, 90-95%RH, 96 hours continuously | Contact Resistance ≤ 30mΩ, Insulation Resistance ≥ 500MΩ, No
breakdown or flashover, No damage |
| Temperature Cycling | 5 cycles: -55±3 (30min) → Room Temp (10-15min) → 85±3 (30min) →
Room Temp (10-15min) | Same as Humidity tests |
| Salt Spray | 35±3, 5±1% Solution. Stamping before plating: 48 hrs; Plating
before stamping: 8 hrs | Contact Resistance ≤ 30mΩ, No damage |
| Solder Ability | Solder Temp: 245±5, Immersion: 3±0.5S | Soldering Area ≥ 90% |
| Resistance to soldering heat (Manual) | Soldering time: 3±0.5S, Soldering pot: 305±5 | No damage |
| Resistance to soldering heat (Wave) | Soldering time: 5±0.5S, Soldering pot: 230±5 | No damage |
