| Ratings |
| Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | 0.5A (AC/DC, 50Hz virtual value) | |
| Ambient Temperature Range | -45 to +85 | |
| Electrical Performance |
| Contact Resistance | 20 m MAX | Mate applicable FPC/FFC, measure by dry circuit, 20mV MAX, 10mA |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC, apply 500V DC between adjacent terminals
or ground |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC, apply 200V AC (virtual value) for 1 minute
between adjacent terminals or ground |
| Mechanical Performance |
| Locking Force | 1.96*n (N) MAX | Insert and extract applicable FFC (0.3mm thick) at 253mm/minute |
| Withdrawal Force | 0.49*n (N) MIN |
| Terminal/Housing Retention Force | 3.92N MIN | Pull the terminal parallel outwards at 253mm/minute |
| Environmental and Other Performance |
| Repeated Insertion and Withdrawal | Contact Resistance 60 m MAX | 20 cycles at a speed rate of < 10 cycles/minute (no power) |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498) |
| Vibration | Discontinuity 1 ms MAX | Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz/min, Duration: 2 hours
in each X,Y,Z axes (DC 1mA) |
| Shock | Discontinuity 1 ms MAX | 490m/s {50G}, 3 strokes in each X,Y,Z axes (DC 1mA) |
| Heat Resistance | Contact Resistance 60 m MAX; Appearance: No Damage | 852, 96 hours, then return to room temperature for 1-2 hours |
| Cold Resistance | Contact Resistance 60 m MAX; Appearance: No Damage | -402, 96 hours, then return to room temperature for 1-2 hours |
| Humidity | Insulation Resistance 20 M MIN; Appearance: No Damage | 402, 90-95% RH, 96 hours, then measured within 0.5 hours at room
temperature |
| Temperature Cycling | Contact Resistance 60 m MAX | 5 cycles of: 30 min at -452, 10-15 min at room temp, 30 min at 852,
10-15 min at room temp |
| Salt Spray | Contact Resistance 60 m MAX; Appearance: No Damage, Corrosion | 484 hours exposure to 51% salt spray at 352, followed by washing
and drying |
| SO2 Gas Resistance | Contact Resistance 60 m MAX; Appearance: No Damage | 24 hours exposure to 505ppm SO2 gas at 402 |
| NH3 Gas Resistance | Contact Resistance 60 m MAX; Appearance: No Damage | 40 minutes exposure to NH3 gas from 28% Ammonia solution |
| Solder Ability | Solder Wetting 95% | Soldering Time: 20.5 sec; Temperature: 2355; 0.2 mm from terminal
tip |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Soldering Time: 50.5 sec; Temperature: 2605; 0.2 mm from terminal
tip |
| Product Shape, Dimensions and Materials |
| Main Body Material | LCP (Natural Color) UL 94V-0 | Refer to drawing |
| Housing Lock Material | LCP (Black) UL 94V-0 | Refer to drawing |
| Terminal/Contact Material | Phosphor Bronze | Metal surface plated with Gold/Tin |
