| Sign In | Join Free | My futurenowinc.com |
|
| Sign In | Join Free | My futurenowinc.com |
|
| Categories | Sleeve Connector |
|---|---|
| Delivery Time: | 5-6周 |
| Current Rating: | 1A |
| Voltage Rating (Max): | 50V |
| Model Number: | PJ-625A |
| Operating Temperature: | -20℃~+70℃ |
| MOQ: | 300 |
| Connector Type: | 6.35mm Headphone Jack |
| Stock: | 3000 |
| Packaging Details: | Through Hole |
| Brand Name: | PJ-625A |
| Description: | 6.35mm Headphone Jack 1A 50V Through Hole |
| Company Info. |
| Shenzhen ECER Network Technology Co., Ltd. |
| Verified Supplier |
| View Contact Details |
| Product List |
This document outlines the specifications for the ZE AR5 Series 6.35 Phone Jack (DIP) from HAOYU (HONG KONG) LIMITED. It details the product's construction, ratings, operating conditions, and performance characteristics.
HAOYU
ZE AR5
6.35 PHONE JACK (DIP)
2008-07-23
| Item | Description | Specifications | Conditions |
| 1 | RATING | DC50V 1A | |
| 2 | OPERATING TEMPERATURE RANGE | -20C~70C | |
| PRESERVATIVE TEMPERATURE RANGE | -15C~35C | ||
| 3A | CONTACT RESISTANCE | 70m max | Measured by contact resistance apparatus or meter at 0.1A DC5V. Average of 5 successive measurements. |
| 3B | INSULATION RESISTANCE | 100M min | Between terminals: 250V DC for 1 min. Between individual terminals and frame: 250V DC for 1 min. |
| 3C | DIELECTRIC STRENGTH | WITHOUT DAMAGE OR BREAKDOWN ETC | Between terminals: 250V AC for 1 min. Between individual terminals and frame: 250V AC for 1 min. |
| 4A | INSERTION AND WITHDRAW FORCE | 3-40N | Measured across spring piece and across matching plug for ergometer. |
| 4B | TERMINAL STRENGTH | 10N (1000gf) | Static load applied to the tip of the terminals for 60 sec. in any direction of actuator. |
| 4C | STANDARD ATMOSPHERIC CONDITIONS | Ambient Temperature: 15C to 35C Relative Humidity: 25% to 75%RH Air Pressure: 80Kpa to 106Kpa | |
| 5A | SOLDERING HEAT TEST | Wave-soldering: 260 5C within 3 seconds. Hand welding: 380C or below within 3 seconds. | |
| 5B | LIFE TEST | 5000 Cycles | Actuator subjected to 5000 cycles at a speed of 30 cycles for 1 min. Without load (tested by machine pushing). |
| HEAT TEST | 852C for 48 hours, then keep in normal condition for 30 minutes. | ||
| HUMIDITY TEST | 402C, 90-96%RH for 48 hours, test after keeping in normal condition for 30 min. | ||
| COLD TEST | -402C for 48 hrs, after test keep in normal condition for 30 min. | ||
| SALT SPRAY TEST | 5% NaCl liquor for 24 hours, after washing, keep in normal condition for 30 min. |
|
