Sign In | Join Free | My futurenowinc.com
futurenowinc.com
Products
 Search by Category
Home > Logistics Services >

HOOYA PJ-609

HOOYA PJ-609

HOOYA PJ-609
HOOYA PJ-609
Categories Sleeve Connector
Stock: 3000
Voltage Rating (Max): 50V
Packaging Details: Through Hole
Operating Temperature: -20℃~+70℃
MOQ: 300
Description: 6.35mm Headphone Jack 1A 50V Through Hole
Model Number: PJ-609
Current Rating: 1A
Delivery Time: 5-6周
Brand Name: PJ-609
Connector Type: 6.35mm Headphone Jack
Contact Now
Company Info.
Shenzhen ECER Network Technology Co., Ltd.
Verified Supplier
View Contact Details
Product List
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
Submit Buying Request
  • Product Details
  • Company Profile

HOOYA PJ-609

Product Overview

Product Type: 6.35 PHONE JACK (DIP)

Series: ZA5

Model: PI-609AE (B{R)

Description: Standard 6.35mm phone jack with DIP termination for various audio and electronic applications.

Brand HAOYU (HONG KONG) LIMITED
Part Number HY-WI-32
Date 2008-07-23
ItemDescriptionTest ConditionsSpecifications
1RATINGDC50V
2OPERATING TEMPERATURE RANGE-20C~70C
PRESERVATIVE TEMPERATURE RANGE15C~35C
3ACONTACT RESISTANCEMETER AT 0.1A DC5V. THE RESULT IS THE AVERAGE OF 5 SUCCESSIVE MEASUREMENTS.70m max
3BINSULATION RESISTANCEA VOLTAGE OF 250V DC SHALL BE APPLIED FOR 1 MIN. AFTER WHICH MEASUREMENT SHALL BE MADE. BETWEEN TERMINALS AND BETWEEN INDIVIDUAL TERMINALS AND FRAME.100M min
3CDIELECTRIC STRENGTHA VOLTAGE OF 250V AC SHALL BE APPLIED FOR 1 MIN. AFTER WHICH MEASUREMENT SHALL BE MADE. WITHOUT DAMAGE TO PARTS, ARCING OR BREAKDOWN ETC. BETWEEN TERMINALS AND BETWEEN INDIVIDUAL TERMINALS AND FRAME.N/A
4AINSERTION AND WITHDRAW FORCE3-40N
4BTERMINAL STRENGTHA STATIC LOAD OF 10 N(1000gf) SHALL BE APPLIED TO THE TIP OF THE TERMINALS FOR 60 SEC. IN ANY DIRECTION OF ACTUATOR.N/A
ItemDescriptionTest ConditionsSpecifications
5ASOLDERING HEAT TESTWave-soldering: within 3 seconds at 260 5C. Hand welding: within 3 seconds at 380C or below.Electrical characteristics shall be satisfied.
5BLIFE TESTAn actuator shall be subjected to 5000 cycles at a speed of 30 cycles per minute.Mechanical and electrical characteristics shall be satisfied.
5CHEAT TEST852C for 48 hours, then keep in normal condition for 30 minutes.No damage on appearance. Mechanical and electrical characteristics shall be satisfied.
5DHUMIDITY TEST402C, 90-96%RH for 48 hours, then keep in normal condition for 30 minutes.Appearance, mechanical and electrical characteristics shall be satisfied.
5ECOLD TEST-402C for 48 hours, then keep in normal condition for 30 minutes.N/A
5FSALT SPRAY TEST5% NaCl liquor for 24 hours, after washing, keep in normal condition for 30 minutes.Without excessive corrosion or crack in appearance.

Application Notes

  1. Rosin and other insulating and caustic material cannot be dipped into the socket during soldering.
  2. Products cannot be blown with air gun or cleaned with a solvent after soldering.
  3. All parts of the products cannot be dissolved before soldering.
  4. Avoid storing the products in a place at high temperature, high humidity, and in corrosive gases.
  5. Shelf life is less than 180 days since the goods were sent out from our factory. Our company does not accept responsibility for rejects if the shelf life of goods exceeds 180 days.
  6. Please feel free to report to us if you discover inferior goods, so that we can take note, check, track and improve them.
Quality HOOYA PJ-609 for sale

HOOYA PJ-609

Send your message to this supplier
 
*From:
*To: Shenzhen ECER Network Technology Co., Ltd.
*Subject:
*Message:
Characters Remaining: (0/3000)
 
Find Similar Products By Category:
Logistics Services
Hot Searches:
Inquiry Cart 0