| Sign In | Join Free | My futurenowinc.com |
|
| Sign In | Join Free | My futurenowinc.com |
|
| Categories | USB DVI HDMI Connectors |
|---|---|
| Delivery Time: | 5-6 weeks |
| Stock: | 3000 |
| Voltage Rating: | 30V |
| Model Number: | USB-307HE-B-SU |
| MOQ: | 300 |
| Description: | USB-C (USB TYPE-C) Receptacle Connector 24 Position Clamp Plate |
| Gender: | Female |
| Packaging Details: | SMD |
| Connector Type: | Type-C |
| Brand Name: | USB-307HE-B-SU |
| Operating Temperature: | -30℃~+80℃ |
| Number of Contacts: | 24P |
| Mounting Type: | Clamping plate |
| Current Rating: | 3A |
| Number of Ports: | 1 |
| Company Info. |
| Shenzhen ECER Network Technology Co., Ltd. |
| Verified Supplier |
| View Contact Details |
| Product List |
This section details the electrical and environmental performance specifications for the HAS45 connector, adhering to EIA-364 standards.
| Item | Description | Test Methods | Test Specification |
|---|---|---|---|
| 7-1 | Insulation Resistance Unmated | EIA 364-21C: Apply 100 Volts DC between adjacent contacts and contacts and ground. | 100M minimum (unmated) |
| 7-2 | Low Level Contact Resistance | EIA 364-23b: 100mA max., 20mV Max. open circuit at 100mA Max. | 40m(Max) initial for VBUS and GND contacts and all other contacts; delta 10m(Max) after test |
| 7-3 | Dielectric Withstanding Voltage | EIA 364-20: Subjected to 100VAC (RMS) for 1 minute between adjacent terminals. | There shall be no breakdown |
| 7-4 | Contact current rating | EIA364-70 | 5.0A shall be applied collectively to VBUS pins and 1.25 A applied to the VCONN pin and 0.25 A the other contacts. When the currents are applied to the contacts, the temperature rise shall not exceed 30 C at any point on the USB Type-C mated plug and receptacle under test, when measured at an ambient temperature of 25 C. |
| Item | Description | Test Methods | Test Specification |
|---|---|---|---|
| Cycle Test | Type C | EIA 364-09: 10000 cycles at a rate of 200 cycles per hour manually. | Must meet the following criteria after the cycle test is completed: Contact resistance (40m > delta 10m (Max) after test), Insertion force (5N to 20N), Extraction force (8N to 20N), Visual inspection (no exposed base metal on contacts). |
| Cable Flexing | Cable Flexing | EIA 364-41: 100 cycles in each of 2 planes 120 degree. Dimension x=3.7x cable diameter. | No discontinuity over 1 microsecond during flexing or physical damage allowed. |
| Cable Pull-Out | Cable Pull-Out | EIA-364-38: 40N steady state axial load for 1 minute. | No discontinuity or physical damage allowed. |
| 4-axes continuity test | EIA364-18: 8N tensile force for a period of 10 seconds. The specimen must be subject to 0, 90, 180, 270 direction. | No discontinuity greater than 1s and no physical damage to the specimen (one cable per test). |
| Item | Description | Test Methods | Test Specification |
|---|---|---|---|
| 8 | Temperature Life | EIA 364-17 | 105C without applied voltage for 120 hours. 105C without applied voltage for 72 hours when used as preconditioning in EIA 364-1000.01. Visual inspection, Test shall be done in sequences defined in EIA 364-1000.01. |
| Thermal Shock | EIA 364-32 | 10 Cycles -55C and +85C. The USB 3.0 connectors under test must be mated. There shall be no evidence of any physical damage. | |
| Salt Spray | MIL-STD-202F, Method 101D, Test Condition B | Subject mated connectors to 48 hours at 35C with 5% Salt-solution concentration. 1).Shall meet visual requirement, show no physical damage. 2).Shall meet requirements of additional tests as specified in test sequence in Section 5 EIA 364 - 1000.01 |
|
