| Number of Contacts | 2 Pole (Mono), 3 Pole (Stereo) |
| Termination | Solder |
| Max. Wire Gauge - Stranded Wire | 2 Pole: AWG 16 (1.5mm), 3 Pole: AWG 18 (1mm) |
| Current Carrying Capacity | 10A (Typical, depends on mating connector and cable) |
| Typical Contact Resistance | Depends on Mating Connector |
| Insulation Resistance (initial) | >2G |
| Insulation Resistance (After Damp Heat Test) | 1G |
| Dielectric Withstand Voltage | 2 Pole: 1.5 kV dc, 3 Pole: 1 kV dc |
| Protection Class | IP40 |
| Operating Temperature | -25C to +75C (-13F to +167F) |
| Insertion and Withdrawal Force | 10N - 30N |
| Weight - Thermoplastic Backshell | 28g (0.061lb) |
| Weight - Metal Backshell | 35g (0.077lb) |
| Typical Cable Retention Force | 22kg to 44kg (50lb to 100lb) (Dependent on cable material and
diameter) |
| Mechanical Operations | 1000 |
| Cable O.D. - Standard Jaw | 3mm to 6mm (0.118 to 0.236) |
| Cable O.D. - Large Jaw | 3mm to 5.5mm (0.118 to 0.216) |
| Cable O.D. - Jumbo | 6mm to 7mm (0.236 to 0.275) |
| Contacts / Plating | Brass / Ni or Au over 2m Ni |
| Connector Shell Material | Diecast Zinc Alloy EZDA No.3 |
| Shell Finish | Satin Nickel or Black |
| Insulators | PBT Resin or Modified PPE Resin - Black (UL94 V-0) |
| Boot / Backshell | Thermoplastic: Santoprene (UL94 V-0), PBT Modified PPO Resin -
Black. Metal: CuZn39Pb3. Polyester (UL94 V-0). |
| Cable Clamp | PBT Resin or Modified PPE Resin - Black (UL94 V-0) |
| Cable Bushing | PBT Resin or Modified PPE Resin - Black (UL94 V-0) |
| Environmental Compliance | Complies with EU RoHS 2 Directive 2011/65/EU |
| Solderability | Complies with IEC 68-2-20 |
| Flammability Rating | UL94V-0 (Insulating Plastics) |
