10T/H Automatic Water Softening System with UV Sterilization and Iron Manganese Removal for Hotels

I. Introduction to Automatic Water Softening System

The softening water treatment system is a water treatment equipment that uses the ion exchange principle to remove calcium and magnesium ions from water. It is mainly used in industrial boilers, cooling systems, chemical production and domestic water. Its core component is the sodium ion exchanger, which is filled with strong acid ion exchange resin. The sodium ions replace the calcium and magnesium ions to achieve water softening.

1.2 Project Name:Iron and manganese removal + softening + sterilization system

1.3 Raw water quality:Refer to the raw water quality report

1.4 System requirements:

1.4.1 System water output: 10m³/h;

1.4.2 Effluent water quality standards: meet international drinking water standards

1.4.3 Working mode: can be continuously run 24 hours a day, recommended working time is 8-12 hours/day;

1.5 Public resources:

1.5.1 Power supply: 380VAC/220VAC (50Hz);

1.5.2 Water source: local water source

II. Details of Product Description

III. Process flow and water volume configuration table

 


 
IV:Photo of Package 


 
 


 


 


 
 


 

 
V:How to choose the model 
First, you need to provide the type of system that needs to use
softened water: 
(1) Heating (2) Cooling water supply (3) Process water (4) Steam
boiler (5) Iron and steel smelting industry (6) Chemical and
pharmaceutical industry  


 
2. System water use time: That is, operating time/hourly water
consumption/average value/peak value/ Does the equipment need
continuous water supply? If necessary, select the double-bed
centralized control or double-control double-bed series, otherwise
the single-valve single-tank series can be selected. 


 
3. Total hardness of source water The water source is municipal tap
watergroundwatersurface water source, and the total hardness of raw
water in the use area. For a certain type of water softener, the
raw water hardness is high, and its cycle water production must be
relatively reduced, which leads to frequent regeneration of the
soft water equipment. Relatively reduce the service life of the
resin. To avoid such a situation, the resin volume should be
increased, which means using a larger model of water softener. 


 
4. Required soft water unit flow rate (tons/hour). This depends on
the nature and requirements of the user's equipment; 5. Setting of
cycle water production After the water softener model is set,
according to the raw water hardness, the exchange working capacity
of the resin used can determine the theoretical cycle water
production (tons).

                                                                                             Shenzhen Hongjie Water Technology Co., LTD 

Shenzhen Hongjie Water Technology Co., Ltd. is a high - tech enterprise specializing in water treatment and environmental protection, dedicated to providing customers with comprehensive engineering solutions in the fields of pure water preparation, wastewater treatment and waste gas treatment. Headquartered in Shenzhen, relying on the innovative resources and technological advantages of the Guangdong - Hong Kong - Macao Greater Bay Area, the company has been deeply engaged in the environmental protection industry, driving green development with technology and contributing to the harmonious win - win of ecology and economy.

Core Business Areas 

Pure Water Systems: Offering customized solutions for industrial ultrapure water, pharmaceutical purified water, and electronic-grade high-purity water, applied in industries such as electronics semiconductors, biopharmaceuticals, and food & beverages. The solutions ensure water quality safety and stability, meeting demanding production needs.

Wastewater Treatment: Providing treatment technologies for industrial wastewater (including difficult-to-treat wastewater), domestic sewage, and reclaimed water, using membrane separation, biochemical treatment, advanced oxidation, and other processes to achieve compliance with discharge standards and resource recovery.

Waste Gas Treatment: Designing efficient purification systems for pollutants such as VOCs (volatile organic compounds), acidic and alkaline gases, and dust, combining adsorption, catalytic combustion, and biological degradation technologies. These systems help enterprises comply with environmental regulations and achieve clean production.

Technological Advantages

The company takes innovation as the engine, gathers senior environmental protection engineers and scientific research team, has a number of independent intellectual property rights of patented technology, and we have established strategic cooperation with famous universities and environmental protection organizations at home and abroad.Through intelligent control system, modularized equipment integration and full life-cycle services, we provide energy-saving, efficient, stable and reliable environmental protection engineering services.

Through intelligent control system, modularized equipment integration and full life cycle service, we provide customers with energy-saving, efficient, stable and reliable environmental protection engineering services.

Project Experience

With years of industry expertise, Hongjie Water has completed hundreds of environmental engineering projects, serving clients across sectors including electronics manufacturing, chemicals, new energy, and municipal utilities. We have earned client trust through a “turnkey project” model, establishing a reputation for “technical expertise and efficient service.”

Certifications & Honors

The company is certified under ISO Quality Management Systems and has been awarded titles such as "National High-Tech Enterprise" and "Guangdong Provincial Environmental Protection Industry Backbone Enterprise." We actively participate in the formulation of industry standards, continuously leading technological innovation in environmental protection.

Development Concept

Upholding the mission of "Purifying Water Sources, Guarding Blue Skies" , Hongjie Water remains steadfastly committed to customer needs, driven by technological innovation, and focused on sustainable development. We provide smarter, greener environmental solutions for global clients, contributing to the building of a low-carbon future.