Every time you reach for the window controls in your Tesla Model 3,
this glossy driver’s door switch becomes the bridge between
intention and action. More than just a button, it’s a precision
interface that connects your command to the window motor—governing
smooth raises, lowers, and the convenient one-touch auto-function.
For 2020 Model 3 owners, the 1081037-01-F isn’t just a replacement
part; it’s a restoration of the seamless, intuitive control Tesla
engineered into your driving experience.
Crafted with a high-gloss piano-black finish, this switch isn’t
just functional—it’s a design statement that complements the Model
3’s minimalist interior. The smooth, curved surface fits naturally
under your thumb, while the tactile "click" feedback lets you know
your command has registered, even without looking.
- Multi-Mode Control: Beyond basic up/down, it supports Tesla’s signature auto-full
open/close (a quick press-and-hold) and the "vent" position
(partial open for fresh air without full exposure).
- Integration with Vehicle Systems: Communicates with the Model 3’s body control module (BCM) to
prevent window damage—if an obstacle is detected mid-movement, the
switch signals the motor to reverse, avoiding pinches or jams.
- Durability: The glossy surface resists fingerprints (unlike matte
alternatives) and stands up to daily use, while the internal
contacts are gold-plated to prevent corrosion from humidity or
spills.
- Unresponsive Windows: Pressing the switch yields delayed or no movement—often due to
worn internal contacts from repeated use.
- Sticky or Stiff Operation: The button doesn’t spring back smoothly, or requires excessive
force—usually caused by debris buildup in the mechanism.
- Intermittent Function: Works sometimes but not others, or auto-mode fails to
engage—indicates a failing circuit board within the switch.
- Cosmetic Damage: Chips, scratches, or fading on the glossy surface (common with
years of 指甲或钥匙接触) that disrupts the interior’s sleek look.
You don’t need a professional to swap this out—here’s how:
- Pry the Old Switch Panel: Use a plastic trim tool to gently release the clips holding the
switch panel to the driver’s door armrest (start from the bottom
edge to avoid scratching the glossy surface).
- Disconnect the Harness: The switch connects to the door’s electrical system via a 10-pin
connector—press the tab and pull to disconnect.
- Swap the Switch: The 1081037-01-F clicks into the panel with spring-loaded clips;
no screws needed. Ensure it sits flush with the panel to maintain
the glossy finish’s continuity.
- Reconnect & Test: Plug in the harness, snap the panel back into the armrest, and
test all functions—basic up/down, auto-mode, and obstacle detection
(try gently blocking the window mid-close to confirm it reverses).
This isn’t a generic switch. The 1081037-01-F is calibrated
specifically for 2020 Model 3s, matching the year’s unique BCM
software protocols. Using an off-year switch may cause erratic
behavior (e.g., auto-mode not engaging) or error messages on your
touchscreen.
Whether you’re fixing a faulty control or refreshing a scratched
surface, this switch brings back that "new car" feel—where every
interaction with your Model 3 feels intentional and effortless.
Order today to restore the precision and polish of your driver’s
door controls.
Tesla Model 3 2023+ Right Hand Door Latch 1738946-01-D 33x28x12mm
