Home > Used General Mechanical Components >

9C5048 SEAL WR WEARING PTFE WEAR RING LOADER

Categories	Seal Kits
Brand Name:	WG CTP
Model Number:	9C5048 SEAL WR WEARING PTFE WEAR RING LOADER
Certification:	ISO9001
Place of Origin:	CHINA
MOQ:	1111
Price:	Negotiable
Payment Terms:	L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability:	2400
Delivery Time:	Within 3-15 days after getting your desposit
Packaging Details:	PP Bag Inside,Carton Box Outside
Oem:	yes
Chemical Resistance:	Excellent
Resistance:	Resistant to heat, oil, and chemicals
Standard Or Nonstandard:	Standard
Odm:	Available
Wiper Seal Brand:	TecThane
Part Number:	HC-001
Appliion:	Hydraulic Breaker
Model:	416
Hby Brand:	SKF
Inventory:	In soock
Material:	Rubber
Installation Method:	Easy to install
Tensile Strength:	Strong
Uv Resistance:	Yes

Contact Now

Add to Cart

Company Info.

Jiangsu Runfeng Jiu Seals Co., Ltd.

Verified Supplier

View Contact Details

Product List

Haven't found right suppliers
Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
And this service is free of charge.
we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!

Submit Buying Request

Product Details
Company Profile

9C5048 SEAL WR WEARING PTFE WEAR RING LOADER

1. Pre-Installation Preparation

Before installing 9C5048 9C-5048, fully disassemble the hydraulic cylinder of the excavator or loader. Use a lint-free cloth and isopropyl alcohol to clean all cylinder components—including the barrel, rod, piston, and seal groove—to remove dirt, old seal residues, or metal shavings. Contaminants left on these surfaces can scratch the PTFE composite of 9C5048 9C-5048, leading to reduced wear resistance. Next, inspect the cylinder rod for scratches, pitting, or bent sections using a surface roughness gauge; the rod finish must be between 0.15 and 0.6 μm to ensure optimal contact with 9C5048 9C-5048. If defects are found, repair or replace the rod before proceeding. Finally, verify that 9C5048 9C-5048 matches the machine’s OEM specifications (checking outer diameter, inner diameter, and thickness) to confirm it is the correct component.

2. Step-by-Step Installation

Install 9C5048 9C-5048 using only dedicated plastic or rubber installation tools—avoid metal tools like hammers or screwdrivers, which can chip the PTFE composite. First, apply a thin layer of PTFE-compatible hydraulic grease to the inner and outer surfaces of 9C5048 9C-5048. This reduces friction during installation and creates an initial barrier against contaminants. Then, carefully slide 9C5048 9C-5048 into the cylinder’s seal groove, ensuring it is fully seated and aligned with the groove edges—misalignment will cause uneven wear and reduced load support. For split-style grooves (common in loader tilt cylinders), press the two ends of 9C5048 9C-5048 together gently until they fit snugly, avoiding overstretching. After installation, reassemble the cylinder in reverse order of disassembly, tightening bolts to the machine’s recommended torque (typically 30-40 N·m for excavator boom cylinders). Conduct a pressure test by applying 500 psi of hydraulic pressure; no leaks around 9C5048 9C-5048 and smooth cylinder movement indicate successful installation.

3. Maintenance Schedule

9C5048 SEAL WR WEARING PTFE WEAR RING LOADER

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Jiangsu Runfeng Jiu Seals Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!