600KG Per Leaf Automatic Roller Wheel Ground Wheel Swing Door Gate Motor Opener Operator

600KG Per Leaf Automatic Roller Wheel Ground Wheel Swing Door Gate Motor Opener Operator

DESCRIPTION

• PK600GL Roller Wheel Swing Gate Automation Kit is suitable for powering the opening and closing motion of gates up to 600kg in weight, up to a length of 4m.
• Gate motion is achieved by the rotating gear of the gate opener.
• The opener must be fitted within private property, never externally to a property’s boundary.
• Before installing the gate opener, please ensure that the swing gate is correctly installed and smoothly moved by hand.
• If installed with electronic lock, please ensure the distance between two gates is from 15-20mm; if without electronic lock, there is no requirement about the distance between two gates.
• Ensure that the power cable is connected to a RCD protected weatherproof power outlet near the gate opener; ensure the height of the control box higher than 1.5m from the ground to keep it out of children’s reach, in order to avoid unintentional activation.
• After finished installation, please ensure again the mechanical functionality of gate opener; the smoothness from back and forth of the gate; and correct installation of infrared sensor(optional)

Cable
To ensure the normal operation of the gate opener and to protect the cables from damage, use PVC pipes for laying the motor, power cable, and control cables. It is recommended to use two separate PVC pipes: one for the motor and power cable and another for the control cable.

TECHNICAL SPECIFICATION

Main Features

• Available for installs 2 openers or 1 opener with a single control box.
• With ground wheels to stop against the ground stops.
• Travel time protection, travel time protection function to open, standard 30 seconds.
• User can select auto-close function.
• Soft start and slow stop, smooth operation and low noise.
• Automatic learning of remote control.
• Keypad / single button interface.
• Alarm lamp, photo beam & safety beam interface.
• Available with articulated arm or sliding arm.
• Manual key release design for emergency purposes.

Standard Unit

• 2pcs gate motors
• control board & box
• 2pcs remote controls
• manual release key
• user manual
• bolts & nuts

PRODUCT DIMENSION

SHENZHEN SINOMATIC TECHNOLOGY CO., LIMITED