Fire Resistance Tester for Gypsum Board Flammability stability tester for Paper Gypsum Board

Application

It is used for mensurating plasterboard stability in case of fire, can also be applied to other building materials, decoration, decoration materials, fire prevention performance measurement.

Test Introduction

It is introduced drilling and processed under prescribed conditions. Suspend the sample between the two fire nozzles with a support rod, making the fire nozzles perpendicular to the surface of the sample. Liquefied petroleum gas is used as the heat source to supply gas to the two burners of the fire stability tester. The distance between the burner nozzle and the plate surface is 30mm. Suspend the load at the lower end of the specimen as per the standard and ignite the burner. Measure the temperature at a distance of 5mm from the plate surface using a thermocouple. At the initial stage of the test, the carbonized protective paper that has fallen onto the thermocouple should be removed without shaking the sample. By adjustment, the temperature was controlled at (800±30) ℃ within 3 minutes and maintained at this temperature throughout the test. Start timing from the moment the specimen is exposed to fire until it breaks and fails. Record the time it takes for each specimen to be burned off, and take the minimum value among the five specimens as the fire stability of this group of specimens, accurate to 1 minute.

Test Parameter

1.Supply voltage: 220W + 10%, 50HZ

2.Power: 180W

3.Ignition:Automatic ignition

4.Thermocouple:Double thermocouple temperature measurement

5.Timer:temperature and time digital display

6.Burner:Double burner, for Φ 9.5 mm + / - 0.5 mm, inner diameter is about 100 mm long, there is air conditioning nut 10 mm, spray fire head (40 + 1) mm in diameter, Spray fire flame hole diameter (2.5 + 0.1) mm

7.Fire Height:20 mm - 100mm

8.Burning duration:adjustable applying time and duration of a burning flame in 0 ~ 99 minutes, 99 seconds range adjustment test process automatic control.

9.The style break fall automatically record the combustion time.

10.Source: test flames of air using liquefied gas or oil gas (suggest try choosing temperament better gas)

11.Flow adjusting range is 100 ~ 1000 ml/Min

12.Timing precision (resolution) : 0.1 s

13.Test temperature: 800-30 ℃, the highest temperature 900 ℃, precision grade 1 time temperature stability: < 3 min (800 +) 30 ℃

14.Specimen: 300 mm (length) x 50 mm (width), on both sides of the distance of 25 mm hole

15.Hanging load respectively: 7, 10, 12, 15, 17, 20 n (0.75 ~ 2.5 ㎏ conversion unit suspended load)

16.Dimension 700 (width) x 300 (deep) x 600 (high) : (mm) 800 mm outer

17.Packing size (width) x 420 (deep) x 700 (high)

Test Standard

GB/T9775-2008(ISO6308:1980)

Installation Sheet

SKYLINE (DONGGUAN SKYLINE INDUSTRIAL CO.,LTD) provides full line of Toys Testing Equipment, Fire Testing Equipment ,Flammability Testing Equipment,Tensile Test Machine, Furniture Testing Machines ,Textile Testing Equipment and other lab test equipment .We also offers value added support services like lab layout, calibration testing procedures / standards, recording techniques and operations of equipment, etc. We have agents to support you in over 10 countries around the world. With a network of representatives providing sales and technical support world-wide.

SKYLINE has achieved good repute in the fields of Fire Testing Equipment, Footwear Testing Equipment, Toy Testing Equipment, Furniture Testing and other lab test equipment.

SKYLINE focus on the lab testing equipment for decads and  we manufacturers the testing instrument as per the international standards like EN71, ASTM, IS 8124 and SRS.

Our major customers are BV, ITS, TUV, SGS, Hasbro and SASO, For these customer 100% testing instruments are supplied by SKYLINE and we are the continuous supplier for these lab. Since SKYLINE is a manufacturer design/develop with advanced technology and having well experienced Technicians which will provide high quality service after sale.

Our main products

Lab Testing Equipment

Flammability Testing Equipment

Fire Testing Equipment

Wire and Cable Fire Tester

Building Material Fire Tester

Toys Testing Equipment

Environmental Test Chamber

Textile Testing Equipment

Furniture Test Machine

Mattress Testing Machine

Temperature And Humidity Test

Our Service

Testing Equipment Design and manufacture

Test Lab Planning and Establish

Toys Test Equipment Upgrade

Toys Test Equipment operation Training

Toys Finish Goods and Mattress  Inspection

Acting for Customer Testing and Certifying

Acting for Foreign Trading Company Quality Inspection

Please have a look at our website and don’ t hesitate to contact us if any items catch your interest. We will do our best to meet your requirement.
Thank you for visiting. We look forward to your inquiry to carry forward win-win cooperation with you soon.