HDPE Geocell GM356-50mm Pavement Reinforcement Grid for Walkways and Cycle Paths

GEOMAX® GEOCELL PRODUCT INTRODUCTION

DETAILED PHOTOS

APPLICATIONS

SOIL REINFORCEMENT Geomax®(Hdpe Geocell) is the solution to soil stabilization or soil reinforcement. It can increase the bearing capacity of the pavement and avoid cracking of the pavement. ♦50% reduction in roadbed thickness ♦70+ years service life ♦10 times the bearing capacity

SLOPE PROTECTION Geomax®(Hdpe Geocell) is the obvious choice for slope protection or erosion control. It has both good drainage effect and slope protection. ♦Environmentally friendly ♦Green vegetation planted on it ♦Excellent drainage with a perforated surface

CHANNEL PROTECTION Geomax®(Hdpe Geocell) delivers stability and protection of channels exposed to erosive conditions ranging from low to high flows, either intermittent or continuous. ♦Prevent seepage and reduce water loss ♦Resistance to higher velocity and continuous flows. ♦Less costly, smaller aggregate (up to 10 times) for the same protection.

RETAINING WALLS Geomax®(Hdpe Geocell) offers highly permeable and acts as a great number of planting pots, allowing rainwater to infiltrate, minimizing runoff. ♦Naturally-Vegetated, Green Retaining Wall Systems ♦25-30% installation faster than MSE block walls. ♦No heavy equipment required.

PRODUCTION LINE

INVENTION AND TESTING

PRODUCT AREA

FAQ:

What specifications do you offer?
We offer a wide range:

• Depth/Height: 100mm, 150mm, 200mm, 250mm, 300mm.

• Weld Spacing: Typically 330mm, 400mm, 500mm, or 600mm.

• Sheet Thickness: Ranging from 1.0mm to 2.0mm+, depending on the product line.

How do I choose the right geocell height?

The height is selected based on the load-bearing requirement and subgrade strength. As a general rule:

• Lighter loads/stable subgrade: 100-150mm.

• Standard road bases: 150-200mm.

• Very soft subgrades/heavy loads: 200-300mm. Our engineering team can provide specific recommendations.

What is the tensile strength of the GeoMax® Geocell?
Tensile strength varies by product. Our standard HDPE geocells typically have a tensile strength exceeding 20 MPa, while our Nano-Composite series can reach 25 MPa or higher. Please refer to our technical data sheets for precise values.

​

Anhui Hechuang New Synthetic Materials Co., Ltd. is a professional manufacturer and supplier of geosynthetic materials and products that are used for civil engineering and constructions.

With solid strength and strong momentum of development, Hechuang has achieved rapid growth over the past years and has established 3 branches in different locations in China supplying different products as HDPE geocell, geogrids and nonwoven geotextile, geomembrane, etc.

The team not only get excellent performance in domestic market,but also has obtained increasing market share in global countries and regions.

Covers an area of 20,000㎡, Hechuang is embracing opportunity from all over the world, making itself more competitive eversince.

Company has a strong technical force, high quality and stable products, perfect sales network and good faithful, efficient and pragmatic team are recognized by the customers.

                                         HCNS  Factory Tour