3.6 Inch 1000 cd/m² Brightness Round TFT LCD Display with Touch Screen for Industrial Instruments

3.6 Inch Touch Sunlight Industrial Instrument 1000 Brightness Round LCD Display

Product Description

• Product Name: Round TFT LCD
• Mechanical OutlineSize(W*H*T): 107.23*107.23*9.73
• Size: 3.6
• IC/LCM Driver IC: ST72566
• Lumens degrees: 1000cd/m²
• Pixel Pitch (W*H): 0.165*0.165
• Round Liquid Crystal Display
• Round TFT LCD
• Circular TFT LCD
• High Brightness
• Circular touch screen

Technical Parameters:

The resolution is 544×506, using IPS full-view high-definition bright display technology. The operating temperature range is -30℃ to 85℃. The interface is RGB 24-bit. It is mainly applied in two-wheel vehicle instruments, industrial instrument displays, medical equipment, etc.

This type of display is mostly of industrial-grade capacitive/resistive touch type. For resistive touch, a dedicated touch pen (with a pen tip diameter of ≥ 1mm) must be used. Avoid using sharp objects (such as screwdrivers, fingernails) to directly click on it to prevent scratching the touch panel coating.

For capacitive touch screens, it is necessary to keep the screen surface clean. If there is any oil or dust, use a dust-free cloth dipped in industrial alcohol (with a concentration of 75% to 95%) to gently wipe it. Avoid using wet cloths or corrosive liquids (such as gasoline) for cleaning to prevent damage to the touch circuit.

The touch response has a certain delay (typically ≤ 100ms). Avoid rapid and consecutive clicks to prevent the accumulation of instructions, which could cause disorder in the instrument operation.

DONG GUAN BIBUKE  Electronics Technology  Co., Ltd. 

It set up in the year of 2002, is a high-tech enterprise specialized in producing LCD and LCM. Our company has 1500 staffs and more than 30000 square kilometer area, advanced LCD production lines, and a professional team with great strength and rich experience. we can customize all kinds of sizes liquid crystal display (LCD) with glass thickness 1.1mm, 0.7mm,0.55mm,0.4mm and the models of TN, HTN, STN and FSTN LCM with COB, TAB, COG, TFT , LED Backlight.

 In this competitive industry, BIBUKE is known for providing high-quality products. Welcome new and old customers to contact us, we sincerely hope to cooperate with partners, create a better future, achieve win-win!  

Products Application field:

Automobiles  Sports Equipment   Watches   Household appliance(air condition/wash machine/electronic cooler/ refrigerator/disinfection cabinet/ wash bowl machine/ calculator /electronic scale etc.)

1. Our standard TFT LCD Display size, and experienced team for Your Custom Solution:
1.44", 1.54", 1.77", 2", 2.2", 2.4", 2.7", 2.8′′, 3.0", 3.2", 3.5", 4", 4.3", 4.5", 5", 5.5", 5.6", 5.7", 7", 8", 9", 10.1", 10.4"
2. Our standard IPS LCD Display size, and experienced team for Your Custom Solution:
1.54", 2.4", 2.8′′, 3.0", 3.5", 4", 4.3", 4.5", 5", 5.5", 7", 8", 9", 10.1", 10.4"
3. Standard touch screen LCD display for all kinds of TFT and IPS LCD display with Resistive and Capacitive touch panel, and can make customized touch screen optical bonding with LCD display
4. High Brightness TFT Display with from 800 CD/m² To1000CD/m² With good performance under sunlight readable (outdoor LCD display).
5. All common TFT Display will O film can be super wide view angle, close to IPS panel & same as MVA glass.
6. Standard TFT and IPS LCD displays option Resistive and Capacitive Touch Panel are applied for Cell phone, Tablet PC, digital and industrial products and so on.
7. Customized and Standard mono Character LCD Module, COB and COG graphic LCD Module with various colors including yellow/green, white, blue, and with various backlight and LCD type combinations.

FAQ:

1.     I want the LCD display 8 digits and the outline size is 65x30x2.8mm………?

If you have not the specification, you can also provide your samples; we will recommend the suitable one

2.This LCD  is just what we want, but it is big size, do you have any smaller size? And the display content need to be changed a little.
      Answer: For the segment type LCD module, if you need modify the outline size or display content,

3. This LCD display is HTN type, but I want STN type,can you make?
      Answer: That’s all right .  we can change for you as per you request.

of the LCD display, display information( Glass thickness, Polarizer, Display Type, Connector mode,
Storage Temp. Operating Temp.  Supply Voltage, Viewing direction, drive condition), we can customize for you.

we can report you the exact time when you confirm the drawing paper.

4. I want customize a new LCD module. Can you do?
      Answer: Yes, we can. Please send your drawing paper. If you have not, please advise me the outline size 

of the LCD display, display information( Glass thickness, Polarizer, Display Type, Connector mode,
Storage Temp. Operating Temp.  Supply Voltage, Viewing direction, drive condition), we can customize for you.

5. What is leading time for tooling?
      Answer: General speaking, it will cost 15 to 25 days  after drawing paper confirmation and tooling charge payment,

we can report you the exact time when you confirm the drawing paper.

6. Can you send us samples for checking?
     Answer: Yes,. Samples order is available.

7. What is the Leading Time?
    Answer: If we have stock for the standard ones, the leading time is one day after payment. If it is the mass production for