If you’re maintaining or repairing the brush assemblies (e.g.,
windshield cowl brushes, door seal brushes) on your 2012-2016 Tesla
Model S and need a reliable clip to secure the brush to its
mounting base—this CFN brush clip (part 1021886-00-A) is the
precision-fit solution. As an engineered replacement (not Tesla
OEM), it mirrors the original clip’s dimensional specs, grip
strength, and material durability, ensuring the brush stays tightly
fastened without slipping or rattling, even during long-term use.
Brush clips might be small, but they’re critical to keeping Model
S’s brush components functional: they lock the brush’s base to the
vehicle’s mounting points (e.g., along the windshield cowl or door
frame), preventing the brush from shifting out of position (which
would reduce its ability to sweep debris, seal gaps, or muffle wind
noise). A broken or worn clip can lead to loose brushes that scrape
against the body, create annoying rattles at high speeds, or even
fall off entirely—compromising both the vehicle’s functionality and
exterior neatness. This CFN clip solves that by matching the
2012-2016 Model S’s original brush mounting needs with precise
specs:
- Key Dimensions: Designed for 4.75mm mounting interfaces, with an 11.10mm outer
diameter (OD) that fits perfectly into the Model S’s brush base
holes.
- Grip Range: Accommodates material thicknesses (T) from 0.76mm to 11.40mm—wide
enough to secure both thin brush frames and thicker mounting
brackets without being too loose or too tight.
- Material: Made of high-impact nylon (matching the factory’s material
choice), it resists automotive fluids (cleaners, waxes), stands up
to extreme temperatures (-30°C to 90°C, ideal for under-hood or
exterior use), and won’t become brittle or crack under UV exposure
(unlike cheap plastic clips that degrade in sunlight).
What sets this clip apart from generic alternatives is its tailored
fit for 2012-2016 Model S brush assemblies. It’s engineered to lock
into the same mounting grooves as the original 1021886-00-A
clip—common uses include securing windshield cowl debris brushes
(which prevent leaves/dirt from entering the HVAC intake) or door
edge seal brushes (which reduce wind noise and protect the door
frame). Its smooth, rounded edges ensure easy installation: just
align the clip with the brush base’s mounting hole, push firmly
until it “clicks” into place, and it locks the brush to the
vehicle—no tools needed, and it won’t damage the brush or mounting
surface during fitting.
Durability is built in, too: the nylon material’s high tensile
strength means it won’t snap if the brush is jostled (e.g., during
car washes or minor impacts), and its corrosion-resistant
properties keep it functional even in wet or snowy conditions (no
rust or degradation from road salt). Even with years of use, it
maintains its grip, so you won’t have to repeatedly resecure loose
brushes.
Note: This brush clip is exclusively for Tesla Model S (2012-2016). It won’t fit newer Model S variants (2017+) or other Tesla models
(3/Y/X), as their brush mounting systems use different clip specs.
It’s ideal for replacing missing, broken, or worn factory clips
during brush maintenance, or as a spare for full brush assembly
replacements—keeping your 2012-2016 Model S’s brush components
secure, functional, and quiet.
Tesla Right-Hand Outer Panel Extension 1522163-S0-A Black Iron
