Industrial Mining Dryer Drying Equipment High Temperature Fast Drying

Industrial Mining Dryer Drying Equipment High Temperature Fast Drying

Scope of application
Dryers are mainly used for drying materials with a certain humidity or particle size in mineral processing, building materials, metallurgy, chemical industry and other departments. Rotary dryers have strong adaptability to materials and can dry various materials. The equipment is simple and reliable, so they are widely used. This series of dryers are widely used in: iron oxide, sludge, coke, pig iron filings, copper concentrate, silicon carbide powder, rare earth ore, mercury ore powder, tin ore powder, cobalt ore powder, nickel ore powder, manganese ore powder, gypsum powder, bentonite, kaolin, iron ore, lead concentrate, petroleum coke, gold ore powder, steel slag, slag, fluorite ore, sea sand, river sand and other materials.

Structural features of dryers
This dryer is mainly composed of cylinder, large gear ring, pinion, support wheel, retaining wheel, wheel belt, support wheel shaft and other parts. The motor passes through the V-belt, and is reduced by two stages of the reducer. The pinion drives the large gear ring to make the cylinder run at the designed speed, so as to evenly dry the materials in the cylinder.
Product Introduction
The rotary dryer has strong adaptability to materials and can dry various materials. It is used in cement plants to dry limestone, clay, coal powder and mixed materials. It is also used in metallurgy, mining, electricity, chemical industry, food and other departments. The rotary dryer is the most commonly used drying equipment in cement plants. The equipment is simple and reliable to operate, has good dustproof sealing and convenient maintenance, so it is widely used.
The drum dryer is widely used in food, feed, chemical industry, medicine, mining and other industries. The working process of the equipment is as follows: After the dehydrated wet material is added to the dryer, the material is evenly dispersed in the dryer and fully contacted with the hot air under the flipping of the evenly distributed scraper in the drum, which accelerates the heat transfer and mass transfer of drying. During the drying process, the material is discharged to the star-shaped discharge valve in the other section of the dryer under the action of the inclined scraper and the hot air. This machine is suitable for drying various types of dregs with a water content of less than 85%, such as beer grains, bean dregs, sprayed corn husks, coal slime, fruit residues, etc. It has a good effect on opening up feed resources, reducing feeding costs, and reducing environmental pollution.

Metallurgy Machine Advantages of flip dryer products:

(1) Compact structure, saving floor area.
Compared with the belt dryer, the equipment has a heavy structure, its structure is more compact, and the floor area can be saved by 50% than the belt dryer.
(2) The combination of light rail, the version of the tilt over freely.
The guide rail adopts light rail combination structure, and the sprocket adopts automatic expansion device. Copy structure is the unique structure of our company, can ensure that the copy over freely. Also effectively solve the phenomenon of chain, card chain, run chain.
(3) Digital temperature measurement display, high safety factor.
With fire prevention device, kiln head, kiln, kiln tail respectively equipped with temperature measuring device and digital display, smoke inlet is equipped with smoke gate, once the machine fails, immediately cut off heat source, prevent fire.
(4) The hot air is evenly distributed to reduce the ball breakage rate.
According to the characteristics of the moisture and the material, the use of aspirant air or layer air distribution, hot air distribution is uniform, and effectively prevent the type ball due to rapid heating two crack, burst, so as to improve the quality of the type ball and less damage rate.

Product Display



Product Parameters

Luoyang Zhongtai Industries Co., Ltd. The company was founded in 1981 and finished joint stock reform in 2005. There are eight subsidiaries and it's an independent legal entity with the qualifications of operating import & export trade.

With a garden-like industrial park and modern standard plant covering 80,000 square meters, ZTIC possesses advanced equipments, technologies and detecting methods. After more than 30 years development, the company has developed into a collectivized one with product designing, manufacture, installation and technical services as a whole. The products comprise all the equipments used in mining, cement, metallurgy, construction as well as the related accessories with high power reducer and large-sized castings & forgings, etc.

ZTIC has acquired ISO 9001:2008 Certification of conformity of Management System Certification, Mine Product Safety Authentication, Recognition for BV Mode Ⅱ Survey Scheme in France, Mining Electrical Equipment KY Certification, etc.
The company has also acquired "Fully Quality Management Achievement Award", "Top 50 Enterprises", "Henan Outstanding Innovative Enterprise” and “The Most Powerful Enterprises of Henan" in 2010.

Quality product performance and good reputation, our products have been exported to mnay countries and regions in the world, including: Russia, Serbia, Australia, Mongolia, Indonesia, Bangladesh and other countries, the products are subject to a great welcome and praise.