Cisco C3850 Series 48 Ports 10G Fiber Network Switch WS-C3850-48XS-S

Cisco C3850 Series 48 Ports 10G Fiber Network Switch WS-C3850-48XS-S

The Cisco Catalyst 3850 Series provides capabilities that ideally suited to support the convergence of wired and

wireless access. The new Cisco Unified Access Data^™ Plane (UADP) Application-Specific Integrated Circuit (ASIC)

powers the switch and enables uniform wired-wireless policy enforcement, application visibility, flexibility, and application

optimization. This convergence is built on the resilience of the new and improved Cisco StackWise-480 technology.

The Cisco Catalyst 3850 Series Switches support full IEEE 802.3at Power over Ethernet Plus (PoE+), Cisco Universal

Power Over Ethernet (Cisco UPOE), modular and field-replaceable network modules, RJ-45 and fiber-based downlink

interfaces, and redundant fans and power supplies.

Network modules

The Cisco Catalyst 3850 Series Switches support five optional network modules for uplink ports. The default switch configuration

does not include the network module. At the time of switch purchase the customer has the flexibility to choose from the network

modules described in Table 2.

Figure1 shows the following network modules:

●4 x Gigabit Ethernet with Small Form-Factor Pluggable (SFP) receptacles

●2 x 10 Gigabit Ethernet with SFP+ or 4 x Gigabit Ethernet with SFP receptacles

●4 x 10 Gigabit Ethernet with SFP+ receptacles (supported only on the 48-port Gigabit Ethernet models or on the 12-port

or higher 10 Gigabit Ethernet models)

Network modules with four Gigabit Ethernet, two 10 Gigabit Ethernet SFP+, or four 10 Gigabit Ethernet SFP+ interfaces

Figure 2 shows the following network modules:

●8 x 10 Gigabit Ethernet with Small Form-Factor Pluggable+ (SFP+) receptacles

●2 x 40 Gigabit Ethernet with Quad Small Form-Factor Pluggable+ (QSFP+) receptacles

Network modules with two 40 Gigabit Ethernet QSFP+ or eight 10 Gigabit Ethernet SFP+ interfaces