1.Adopt high quality stainless steel chain for conveying;
2.Adopts the new type cleaning chain device for thoroughly
cleaning;
3.Exhaust device adopts large air volume, high air pressure, low
noise fan,upper and lower exhaust filter structure, two-stage filter;
4.It can effectively prevent the flux dropping on the surface of
PCB and keep it clean;
5.The imported nozzle with small diameter is adopted to adjust the
spraying conveniently,which will display the air pressure parameters in numerical value
that is convenient for management and operation;
6.Flux supplying with constant pressure, and equips with flux auto
adding device;
7.Man-machine interface operation, PLC control;
8.PC+ motion controller control, realize X, Y axis linkage;( for
selective spraying option).
9.Stainless steel filter + backflow mechanism is used above the
spray, and the lower layer is equipped with air pumping mechanism on both sides of the box, which improves the flux recovery rate;
Remarks:The computer and monitor will be configured for the
selective sprayer.
Specifications:
| Item | YSL-350S | YSL-350S(selective spray function) |
| Conveyer Motor | 220V 60W |
| Conveyor Speed | 0.5-1.8min |
| PCB Size | 50-350mm |
| Inlet height | 750±20mm |
| Spray drive motor | Step Motor 48V |
| Finger Cleaning Pump | 220V 10W |
| Exhaust fan | 3∮380V 50Hz 750W |
| Air pressure of Spray Fluxer | 3-6bar |
| Dimension | 1450(L)*1100(W)*1350(H)mm |
| Total Power Consumption | Approx. 1.3KW |
| Normal running power | 1.0KW |
| Power | 3∮380V 50Hz/60Hz |
| Net Weight | Approx.350kg |
| Control Type | PLC Touch screen+PLC | PC+ motion controller |
Finger Type
We now have five different types of fingers as standard finger
might not be able to meet customer products’requirements
| Double hook finger | Item | Parameter |
| Technical distance | ≥4mm |
| PCB thickness | ≤3mm |
| Material | Titanium alloy |
Double hook finger (L type) | Item | Parameter |
| Technical distance | ≥4mm |
| PCB thickness | For the production with jig, no limit on thickness of jigs |
| Material | Titanium alloy |
Light-duty double Hook Finger | Item | Parameter |
| Technical distance | ≥4mm |
| PCB thickness | ≤2.5mm |
| Material | Material is stainless steel and titannium alloy |
| Spring pressed finger | Item | Parameter |
| Technical distance | ≥4.5mm |
| PCB thickness | ≤5mm |
| Material | Support chip is titanium alloy,tabletting is stainless steel |
| D-40 duchbill finger | Item | Parameter |
| Technical distance | ≥3mm |
| PCB thickness | ≤2mm |
| Material | Titanium alloy |
