8.4v 1a li ion Battery Charger

8.4v 1a li ion Battery Charger

Description

The specification defines the performance characteristics of a 3.65W. Single Output level Switching Power Supply for GJS12-036100 The power supply has designed highly reliable and meet intermational safety and electromagnetic compatibility requirements.

1 . Input Characteristics.

1.1 Normal Input Voltage:

It is normal for 100-240Vac input AC voliage

1.2 Input Voltage Range:

The Power shall operate form 90-264Vac

1.3 Input Current:

1.4 Rated Input Frequency:

It is normal for 50Hz or 60Hz and single phase.

1.5 AC Input Frequency Range:

The Power shall operate with an input frequency from 47Hz to 63Hz

1.6 No Load Power Consumption:

Maximum non-load power consumption is less than 2.0W ai 115Vac/60HZ and 230Vac/50HZ

1.7 Inrush Current (cold start) : 30A Max.@110 Vac/60HZ

:60A Max. @230Vac/50HZ

1.8 Active Power Factor Correction: Typical •••

1.9 Input protection:

1.10 Efficiency:

2. Output Characteristics.

2.1 Rated Voltage

The rated output voltage is specified at3.65V

2.2 Voltage Range

The output voltage will be performed 3.65-3.8V when the load is 0A

2.3 DC Load Characteristics

2.4 Use status indication

2.5 Ripple/Noise

Output Ripple voltage is 500mV peak to peak or less.(100Vac 60Hz/240Vac 50Hz)

Measured methods:

*The ripple is measured from peak to peak with band width limit of 20MHZ (C1 : 0.1uF Ceramics capacitor C2:47uf/50V Aluminum capacitor under DC output full ) Load, AC nominal input 25℃ ambient temperature).

2.6 Turn on delay (CV mode)

The power shall switch on in less than 3 seconds at input voltage is 115Vac

2.7 Hold-up time ( CV mode)

Schematic diagram The output voltage shall be sustained 6mS within regulation requirement after loss 100Vac and maximum load

2.8 Rise time ( CV mode)

DC output rise time from 10% to 90% of output voltage shall be less than 40mS at nominal line and maximum load

3.1 Over Voltage Protection:

3.2 Over Current Protection: Maximum constant current of not greater than 1.5A

The power shall be auto-recovery

3.3 Short Circuit:

Output can be shored without damage No odor, smoke, fire,plastic deformation, and excessive heal happen. The power shall be auto-recovery. (It will enter into normal condition when then the fault condition is removed)

4 Environment (temperature and humidity)

4.1:Operating temperature 0℃-35℃

4.2:Operating humidity 200%-90% ( Relative humidity).

4.3: Storage temperature -20℃ -80℃.

4.4 Storage humidity 0%-95%. (Relative humidity).

4.5: Dropping Packed:

Wall mount type and Height 76cm for desktop type as. The horizontal surface consists of hardwood at least 13mm thick , mounted on two layers of plywood each 19mm to 20mm thick . all supported on a concrete or equivalent non-resilient floor.

Welcome to OEM/ODM

Free sample

Sample time : 3-5days

Delivery time:7-10days

Trade terms: FOB shenzhen

Payment : T/T ,L/C,PAYPAL ,Western Union

All product warranty 3 years(One years damage manufacture one to one exchange.)

Printing you LOGO and stick you modle also ok .

Credit is the basis , Quality is the first

Power adapter ,Charger ,Power supply Manufacture

Skype:beryl--qin

What's app: 86 13412619588

QQ:1767294269

Wechat: beryl18

www.btbadapter.com

   Shenzhen BTB Technology Co. ,Ltd ,established in 2002, is a leading manufacturer and exporter of switching and linear power adapters, transformers, chargers, car chargers and  high-tech enterprise specialized in developing and manufacturing products in the fields of Power Supply Products,  DC stabilized constant current power supply, AC stabilized power supply, DC-DC convertorPublic Safety Electronic Products etc.
     which have been widely used in public security, school, scientific research institution, and domestic large, medium and small-scale enterprises and foreign invested & joint venture enterprises, and are sold well to all over the country and accepted by many well-known factories.
    We strict implement the operation guideline of “Leading Technology, Reliable Quality, Satisfactory Service and Customer First”, are dedicated to building up our series products, and win the market with first-class quality, perfect services and higher price & performance ratio.
    Advanced technologies, reliable products, competitive prices and excellent service are leading Anqishun to greater achievements. Anqishun continues to explore new technologies and markets to satisfy flexible requirements of the customers all over the world.
   .We will win more customers’ trust with good credits and services. We will meet a new day with the spirit of more self-confidence, dedication, justice and innovation!

    We have a strict quality control and guarantee system and have been ISO9001:2000 certified. All our main products have obtained CE approvals of the European Union and CQC and CCC approvals of Chinese Quality Certification Center. Besides, we also carry out the international authoritative certifications, such as UL,Rohs,PSE,BSMI,SAAA,GS,KC,EK, CUL, TUV, CSA, and GS, etc.

We commit to supply high quality products and competitive prices to our customers with professional technologies and top-ranking services.

ODM/OEM partners are welcomed too.

CONTACT INFRMATION:

Email:mx1@btbadapter.com