| Design Parameters | If you need our design, please offer the following parameters to confirm: |
| 1, Project location(country/area) | |
| 2, Size( Length × Width × Height cm) | |
| 3, Snow load (Max. snow height mm Kn/m2 ) | |
| 4, Wind load (Max. Wind speed Kn/m2 km/h m/s) | |
| 5, Seismic magnitude | |
| 6, Middle Column allowed or not | |
| 7, Brickwall allowed or not (cm) | |
| 8, Door&Window Quantity&Size | |
| 9, Crane allowed or not |
Steel structure manufacturing technology is not difficult. It is
mainly for the secondary physical processing of raw steel materials
( such as steel plate and section steel). The main steps include
blanking, cutting, hole making, assembly, welding processes and
steel surface processing.
However, unlike the standardized processing and manufacturing
business, steel structure processing belongs to the customized
processing according to specific project requirements. This kind of
non-standard manufacturing makes its large-scale business expansion
to require high demanding on the management. Imprecise production
management will be easy to increase the production cost waste. This
is also the main reason why many steel enterprises in the industry
are relatively small in scale. Small enterprises can rely on the
meticulous management of the boss to achieve better control for
production details. However, once the scale is further expanded, as
persons' management energy limitation, production details will be
easy to lose the control. It also reflects the strict requirements
of steel structure enterprises in the production management.
With good production management, the cost will be well in the
calculation and control. In addition, the product quality will also
be in a steady high level. Even though there is the quality
questions, there will be a ready profesional team to solve.
Prepare Raw Materials | Cut steel plate or use international size H section steel and angle steel, round tube, round steel, square tube etc.; |
| Assembly and Welding | Our welders will follow the drawings to assemble the steel members
and weld them together as a entire beam/column/brace and so on; Our quality inspector will check the steel pieces after finish welding. This process will go through the 1st quality check. |
| Sand blast | After finish welding and polishing, our sand effect can reach international 2.5 high grade, very good for resist rust. This process will go through 2nd quality check. |
| Paint | Within 2 hours after sand blast, all the steel members should be painted. Clients can choose any color and any brand of painting. This process will go through 3rd quality check. |
| Inspect the goods by clients | After we finish a part of fabrication work, we will invite clients to inspect the goods before we pack the steel components. If not available to inspect, we could send video for reference. |
