640x512 Resolution Long Range Thermal Camera 15kg Detection Range Up To 10KM For Long-Distance Surveillance

Vehicle 13,000 m Human 4,800 m

For fire 6,000 m (2m X 2m )

1. Zoom: Electric zoom

2. Focus: manual / auto focus, 3A adaptive active focus algorithm, support multiple trigger modes, precise high speed

3. Optical machine: 3CAM mode and AS+DOE optical machine structure, high infrared transmittance, no virtual focus and small axis in the zoom process

1. Image enhancement: SDE digital image enhancement technology to enhance image details

2. Pseudo-color polarity: 16 kinds of pseudo-color images, hot black / hot white two polarities

3. Image parameters: AGC automatic gain control, brightness, contrast

4. Electronic zoom: 2×, 4×, support global synchronous display

5. NUC correction: automatic / manual correction, background correction

1. 1/2.8'' target surface star-level CMOS, integrated ICR dual filter day and night switching

2. Resolution: 2 Mega pixels, 1920×1080

3. Illumination: color: 0.05 Lux; black and white: 0.01Lux

4. Encoding: H.265/H.264 video format, support multi-stream

5. Video bit rate: 32Kbps ~ 16Mbps, 60Hz 30 frames / sec

6. Support SD card local storage, support motion detection, occlusion alarm, cross-border detection, regional intrusion detection

Support white balance, electronic shutter, strong light suppression, 3D digital noise reduction, wide dynamic, anti-infrared over exposure

1. Focal length: 8 ~ 500mm, 2 mega pixel power zoom

2. Focus: manual / auto focus, 3A adaptive active focus algorithm, support multiple trigger modes, precise high speed

3. Aperture: Automatic

4. Day and night type light: 0.4-0.75um visible light wide spectral window and 0.8-0.95um near infrared laser narrow spectrum window day and night independent double pass light window to improve imaging light and stray light signal to noise ratio

Preset position: precision potentiometer, zoom focus feedback

Laser Source

(optional)

1. Power: 8W

2. Wavelength: 810nm military grade infrared laser

3. Illumination angle: 1 ° ~ 20 °, DSS digital step lighting angle control technology

4. Homogenization: GHT-II high-definition lens group ultra-homogenization patented technology, brightness balance of all focal lengths is >92%

5. Laser safety: ZQB safety laser beam processing patent technology, in line with international IEC60825 safety standards

1. 255 adjustable alarm threshold values

2. Adjustable monitoring area, auto detection of target size

3. 1-16 alarm targets, auto selection of the most obvious one

4. Two types of alarm: screen display and audible alarm

5. Less than 0.01s alarm response ensures no omission

6. All parameters can be modified via OSD menu, universally adaptable

7. Optional IP network coding transmission, and provide free platform and SDK

8. Dedicated platform: (Optional with special fire prevention warning platform, with automatic scanning, alarm, GIS positioning, fire dynamic evolution, fire fighting strategy, etc., forming a professional system)

1.Material: integral aluminum alloy housing, stainless steel, anti strong wind ;

2.Structure: Integral double window

3.Window glass: 4mm optical glass ,transmission＞98% ；

4.Surface coating: PTA three-proofing coatings ,

5.Protection:IP66(IP67 optional )

6.Applied thermal balance design and wide temperature electronics ,which could operate under high / low temperature ;

7.Interface : waterproof aviation connector ;

1. Load: 30kg PTZ

2. Range: Pan 0 ~ 360 °, Tilt -45 ° ~ +45 °

3. Speed: horizontal 0.01 °/ S ~ 30 °/ S, pitch 0.01 °/ S ~ 15 °/ S,

support lens focal length speed adaptive function

4. Preset position: 255, support lens zoom, focus preset

5. Accuracy: ±0.1°

6. Patrol sweep: support 6 cruises, 1 apple peel, 1 line sweep

7. Watch: Preset / Auto Cruise Route / Auto Scan Route

8. Power-off memory: support (recoverable position before power-off, preset position status, cruise status, line sweep status)

9. Bearing information: support angle query return, positioning

10. Zero point correction: support north direction zero point remote correction function

11. Power consumption: about 80W

12. Weight: 15kg

1. Network interface: 1 way RJ45, 10/100 Base-T adaptive (integrated video output and RS422/485 control communication)

2. Network protocol: support TCP/IP, UDP, IPv4/v6; support HTTP, RTP, RTSP, NFS, DHCP, NTP, SMTP, SNMPv1/v2c/v3, UPNP, PPPoE, DNS, FTP; support PSIA, ONVIF2. 0, GB28181 and other network protocols

3. Power supply: AC/DC24V, anti-reverse protection

4. Physical interface: alloy waterproof aviation plug

1. Glare protection: support, anti-sun burn function

2. Temperature correction: no thermal image design, imaging resolution is not affected by temperature

3. Scene mode: support multiple configuration scenarios, adapt to no environment application

4. Auto focus tuning: support remote auto focus precision parameter adjustment, adapt to different scenes

5. Day and night cruise: day and night group cruise different preset groups, day cruise 1-40 preset position, night cruise 41-80 preset position, automatically switch day and night according to the photosensitive state, adapt to different time and space scenes

6. Lens servo: support lens preset position, focal length return, focus positioning function

7. Parameter setting: OSD menu remote call operation

8. Remote maintenance: support embedded program remote upgrade for easy after-sales maintenance

1. Wiper: (optional built-in wiper)

2. Window cleaning: (optional external small spray device, self-storing water, no damage to ice, no impact on host function)

3. Expansion module: (optional Beidou / GPS, laser ranging and other extended functions)

4. Optical network: (optional built-in fiber module, single-mode fiber output, improve anti-interference)

1. Support regional intrusion detection

2. Support cross-border intrusion detection

3. Support multi-scene group cruise detection

4. Support 3D frame selection zoom / positioning

5. Support automatic tracking

6. Support panoramic stitching

7. Support radar linkage

(Note: The above functions need to be coordinated with the key area prevention software)

1. Total power consumption: 150W

2. Total weight: 35kg (including Pan/Tilt)

1. Working temperature: -25 ℃~ +60℃ (optional -40 ℃)

2. Storage temperature: -45℃ ~ + 70 ℃

3. Humidity: <90%

4. Earthquake resistance: 0.2g (according to the 5.4 severity level 2 of GB/T15211-2013)

5. Impact resistance: 15g (according to the 5.3 severe level 3 of GB/T15211-2013)

6. Lightning protection: built-in surge protection of interface circuit, power supply 4000V, signal 2000V

7. Anti-salt fog: at pH 6.5 ~ 7.2, continuous spraying for 96 hours, no change in surface

Protection level: IP66