YJJ ABPDANN010BGAA5 Pressure Sensor 10bar Basic Type Board Installation Digital Interface Clock Frequency 100 50 -400 800 kHz

Product Description:

ABPDANN010BGAA5 Multi-scenario Application Basic Type Board Installation Pressure Sensor is 10bar

Features:

• Measures gage and differential

pressures

• Total Error Band (see Figure 1): ±1.5 %FSS

• Liquid media option: Allows for wet/

wet operation on dual ported devices

• Industry-leading long-term stability:

±0.25 %FSS

• Industry-leading accuracy: ±0.25 %FSS

BFSL

• Wide pressure range: 60 mbar to 10 bar

| 6 kPa to 1 MPa | 1 psi to 150 psi

• As small as 8 mm x 7 mm

• High burst pressures (see Table 7)

• Calibrated over temperature range of 0°C

to 50°C [32°F to 122°F]

• Operates from a single power supply of

either 3.3 Vdc or 5.0 Vdc

• Output: Ratiometric analog or I2C- or

SPI-compatible 12-bit digital

• Power consumption: 2 uA typical when

utilizing sleep mode option

• Meet IPC/JEDEC J-STD-020D.1

Moisture Sensitivity Level 1

requirements

• REACH and RoHS compliant

• Options: Internal diagnostic function,

liquid media, sleep mode, temperature

output

FIGURE 1. TOTAL ERROR BAND TABLE 1. ABSOLUTE MAXIMUM RATINGS1 CHARACTERISTIC MIN. MAX. UNIT Supply voltage (Vsupply) -0.3 6.0 Vdc Voltage on any pin -0.3 Vsupply + 0.3 V Digital interface clock frequency: I2 C SPI 100 50 400 800 kHz ESD susceptibility (human body model) 2 — kV Storage temperature -40 [-40] 85 [185] °C [°F] Soldering time and temperature: lead solder temperature (DIP) peak reflow temperature (Leadless SMT, SMT) 4 s max. at 250°C [482°F] 15 s max. at 250°C [482°F] 1Absolute maximum ratings are the extreme limits the device will withstand without damage. TABLE 2. ENVIRONMENTAL SPECIFICATIONS CHARACTERISTIC PARAMETER Humidity: all external surfaces internal surfaces of Liquid Media Option (T, V, F, G) internal surfaces of Dry Gases Option (N, D) 0 %RH to 95 %RH, non-condensing 0 %RH to 100 %RH, condensing 0 %RH to 95 %RH, non-condensing Vibration 15 g, 10 Hz to 2 kHz Shock 100 g, 6 ms duration Life1 1 million pressure cycles minimum Solder reflow J-STD-020-D.1 Moisture Sensitivity Level 1 (unlimited shelf life when stored at

Specifications:

Yijiajie Electronics is a full range of silicon pressure sensors from the United States, FREESCALE/, GE, MEAS, SMI, and a full range of sensing and control products from the United States pressure, temperature and humidity, gas flow, current, Hall effect, etc., Japan HAMAMATSU flame, UV sensors, photodiodes, Japan FIGARO, UK CITY, ALPHASENSE full range of semiconductors, catalytic, electrochemical gas sensors, French HUMIREL/MEAS humidity sensors and other international well-known companies authorized agents or distributors, to provide customers with product information, products Solutions, product selection, supply guarantee and logistics services, etc.