Nitrogen Sintering Rapid Thermal Annealing Furnace For Industrial 1000Ordm C

350*300*550mm W*H*D Effective Chamber Dimensions Sintering Furnace for Industrial Applications at 1000 ordm C

Equipment Name and Model: MBF60-10 Type Medium-Temperature Clean Box Furnace

Application Fields:

Mainly used for high-temperature heat treatment processes of similar products such as electronic devices and electronic ceramics.

Technical Specifications and Basic Configuration

3.1 Rated Temperature: 900°C;
3.2 Maximum Temperature: 1000°C;
3.3 Inner Lining Material: Fused Quartz;
3.4 Effective Dimensions: 350 ×300 × 550mm (W × H × D);
3.5 Heating Rate: ≤10°C/min;
3.6 Heating Elements: FEC ceramic fiber heating plates, heating from all four sides;
3.7 Temperature Stability: ±1°C, with PID parameter self-tuning function;
3.8 Temperature Uniformity: ±5°C (tested with an empty furnace at constant temperature of 900°C);
3.9 Thermocouple Type: K-type;
3.10 Number of Temperature Control Points: 1 point;
3.11 Number of Temperature Control Segments: 9 segments;
3.12 Exhaust Chimney: Equipped with an exhaust port at the rear, which can be manually adjusted;
3.13 Inlet Design: Allows the introduction of dry, clean, oil-free compressed air or oxygen into the furnace chamber, with the inlet flow controlled by a glass rotameter, measuring range 10-100LPM;
3.14 Alarm Protection: Over-temperature, open circuit, etc., with audible and visual alarm protection, and over-temperature alarm power-off protection function;
3.15 Maximum Heating Power: 16 kW;
3.16 Typical Insulation Power for an Empty Furnace: ≤8 kW;
3.17 Surface Temperature Rise: <35°C;
3.18 Equipment Weight: Approximately 400 Kg;
3.19 Equipment Exterior Color: Light Grey;
3.20 Reference External Dimensions: 860 × 1750 × 1220mm (W × H × D).