CNC part Stainless steel 410 lathe machining parts for oil and gas industrial applications

CNC part Stainless steel 410 lathe machining parts for oil and gas industrial applications

Product Description:

Applications

Sandblasting is a process for surface treatment of workpieces. Adopting compressed air as the power, in order to form a high-speed jet beam will spray material (copper ore, quartz sand, emery, iron sand, sea sand) high-speed jet to the surface of the workpiece to be processed, so that the appearance or shape of the surface of the workpiece changes. Due to the impact and cutting effect of the abrasive on the surface of the workpiece, the surface of the workpiece obtains a certain degree of cleanliness and different roughness, so that the mechanical properties of the surface of the workpiece can be improved, thus improving the fatigue resistance of the workpiece, increasing the adhesion between it and the coating, prolonging the durability of the coating film, and also conducive to the levelling of the coating and decoration.

Cadmium plating is also prone to ‘cadmium brittle’ phenomenon, usually at higher temperatures, and at the same time the existence of certain stress conditions, can make steel and titanium alloys produce cadmium brittle. As cadmium plating layer in 232 ℃ above can be leached into the steel parts of the matrix, can cause the so-called ‘cadmium brittle’ phenomenon, so the use of temperature should not exceed 232 ℃.
Cadmium-plated layer can be welded, the plating can reduce the oxidation of copper-plated electrical contacts, but also does not increase the contact resistance. Cadmium-plated layer is usually used in steel fasteners, piping and other stressed parts, aluminium and aluminium alloy parts, magnesium alloy parts, and rubber contact with the steel and copper parts. Especially some elastic parts, threaded parts, standard parts and aerospace, shipbuilding, electronics and military products are used to use cadmium plating. But cadmium vapour and its soluble salts are highly toxic and seriously pollute the environment. Therefore, the application of cadmium plating layer is subject to strict limitations, has been rarely used, most of the zinc plating layer and zinc alloy layer to replace the cadmium plating layer.

About Us






Package

Hunan Jiashan Hardware Tech as a branch company of J AND R METALWORK,established in 2007 and located in Changsha, Hunan, China.After almost 17 years management development and technical improvement, Jiashan is willing to be a leading supplier in hardware industry. Meanwhile, we are one of member of Hardware industrial Association and Green energy industry Association.

Jiashan is specialized in milling,turning,lathe 5 axis cnc machining parts,injection molding parts,alumium extrusion parts,laser cutting parts,sheet metal fabrication parts,wire edm parts,vacuum casting parts and fasteners.Those parts are widely service for electric vehicle,solar system,wind power system and construction machinery industry.

During17 years domestic and abroad market investigation, Jiashan's products are sold to many countries and regions including the North America, Europe, Australia, the Middle East and Asia. With owned the advanced cnc machinee, milling machine, polishing machine, stamping machine etc. Jiashan is able to degsin and produce varies OEM parts with drawings or samples provided. Further more, Jiashan also can help to provide a whole solution for modularity R&D of electric vehicle and solar system .

By constantly strengthening our management and consummate the quality guarantee system.In 2023, Jiashan acquired ISO9001:2008 quality certification. Currently,the 5S management mode is implemented in the whole Jiashan system.

Best quality and best service is and will be always our toppest concern.