Manufacturer Supply Calcined Petroleum Coke GPC Recarburizer Semi Graphite Petroleum Coke

Manufacturer Supply Calcined Petroleum Coke GPC Recarburizer Semi-Graphite Petroleum Coke
Description

Carbon additives are suitable for melting and using in induction furnaces, but the specific use is also different according to the process requirements. When using carbon additives in medium-frequency electric furnace melting, they can be added into the lower part of the furnace according to the ratio or carbon equivalent requirement. The recovery rate can reach more than 95%. If the carbon content is insufficient to adjust the carbon content, first clean the slag in the furnace, and then add the carbon additive.

Through the heating of the molten iron, electromagnetic stirring or manual stirring to make the carbon dissolve and absorb, the recovery rate can be about 90%. If the low-temperature carbon increase process is adopted, that is, only a part of the furnace charge is melted, and the temperature of the melted molten iron is low, all the carbon additives are added into the molten iron at one time, and at the same time, the solid furnace charge is used to press it into the molten iron to prevent it from exposing to the surface of the molten iron. In this way, the carbon increase of the molten iron can reach more than 1.0%.

Specifications

Packing & Delivery

Packing: 1 ton big bag, 20-25mt in 20' container


Our Services

We can try our best to provide you the good services as below:

1.We have Experienced staffs .

2.Provide kinds of certificates.

3.24 hours on line to answer all your questions .

4.The content packing particle size may be based on customer demand.

5.Quality can be guaranteed. we provide safe products to our users.

ZhenAn is an enterprise specializing in Metallurgical & Refractory products , integrating production, processing, sales and importing and exporting business.
We are focused on building a dedicated team of professionals across the globe. At ZhenAn, we are committed to provide complete solutions by delivering the “right quality & quantity” to suite our customer’s processes.

Annual production and sales more than 150,000 tons. Our factory covering an area of 30,000 square meters, it has a complete set of modern production equipment, two large production bases including hydro-metallurgy, two key laboratories and a metallurgical materials testing center with dozens of senior researchers.