30×20×40cm JIS Z0237 1/32″ Tape Tack Ball Tester Adhesion Testing Equipment
|
Tape Tack Ball Tester / Tape Adhesion Tester / Initial Adhesion Standard GB4852, JIS Z0237, CNS-11888 and etc. Usage To make glue side of the tape sample on, stick it in the 30°(or designate) test board. Take the steel balls since the largest one, and make it rolling down free on sample. Then record the ball number which reaches 5 seconds as the initial adhesion value of the tape......
GUANGDONG KEJIAN INSTRUMENT CO.,LTD
|
Tilt Angle 22° Adhesion Tape Rolling Ball Tack Tester
|
... on adhesive tape by rolling distance to determine the merits of tape tack. Machine operation procedures : Clean up chute and grounder on the tester by GB/T 4852-2002 specified ways,and after that you cannot touch them anymore. Fix test piece on hard and...
Perfect International Instruments Co., Ltd
|
IEC68 120mm Adhesion Tape Rolling Ball Tack Tester
|
Professional Adhesion Tape Rolling Ball Method Initial Tack Ball Test Instrument Product use: Using the inclined ball method, when the short contact between the steel ball and the adhesive surface of the test specimen occurs with a slight pressure, the ......
Guangdong Aisry Instrument Technology Co., Ltd.
|
GB4852 Stainless Steel Adhesive Tape Initial Viscosity Tester For Sticky Product
|
...Tape Initial Viscosity Tester For Sticky Product Specifications : This equipment is used to test the initial tack. Application: This instrument is designed according to the standard GB4852. It is used for the testing of initial tack of adhesive tapes and other sticky products. Technical data: Ball Material Stainless Steel Angles 20-60°(adjustable) Ball Size 1/32......
Dongguan Zhongli Instrument Technology Co., Ltd.
|
PSTC 6 Rolling Ball Tack Tester Tape Initial Adhesion Testing Machine
|
...Ball Tack Tester Tape Initial Adhesion Testing Machine 1. Test principle PSTC 6 Rolling Ball Tack Tester adopted the inclined plane rolling ball method and the inclined groove rolling ball method of method B: Method A: the adhesion of the adhesive tape to the steel ball when A short contact occurs between the steel ball and the adhesive surface of the pressure-sensitive adhesive tape......
DONGGUAN LONROY EQUIPMENT CO LTD
|
20º ~40° Adjustable Angle Tape Initial Adhesion Testing Equipment / Rolling Ball Tack Tester
|
.... Application It is applicable in tack tests of pressure sensitive adhesive tapes, adhesives, adhesive products.Turn the adhesive surface of specimen upward and place it onto the test plate (inclining 30°).Release freely the steel balls from large one to...
Dongguan Liyi Environmental Technology Co., Ltd.
|
Celtron Load Cell Bend Tear Electronic Tensile Tester High Precise Ball Screw
|
...Tester High Precise Ball Screw Product Description Celtron load cell testing Bend Tear Electronic Tensile Tester High Precise Ball Screw is designed for quick and reliable tensile, compression, bending, shear, peel, loop tack and fatigue cycling on metals, tape......
Hai Da Labtester
|