Intelligent Dual Frequency Eddy Current Detector Hef-2d 10 Hz To 10 Mhz Frequency Range
![]() |
10 Hz To 10 MHz Frequency Range Intelligent Dual Frequency Eddy Current Detector HEF-2D Product description ◆ HEF-2D is HUATEC electromagnetic product family adds a "forcing", using the world's most advanced DSP and FPGA integration technology greatly improve the signal processing speed, detection accuracy rate is 10 times that of similar products. ◆ Suitable for almost all eddy current......
HUATEC GROUP CORPORATION
|
10 Hz to 10 MHz Frequency Range Intelligent Dual Frequency Eddy Current Detector In Digital Electronic Balance
![]() |
... processing speed, detection accuracy rate is 10 times that of similar products. ◆ Suitable for almost all eddy current testing applications, but also effectively suppress interference signals, which not only has a conventional digital "dual"...
HUATEC GROUP CORPORATION
|
Touch Screen Eddy Current Detector Shuttle Digital Knob Panel TMD-306
![]() |
...Eddy Current Detector Eddy current signal time base scanning curve display Technical Parameters Basic Specification Operation interface Touch Screen, Shuttle digital Knob panel Frequency range 100Hz-3MHz(Enhanced model 100Hz-6MHz ). The Minimum increment is 1% of indicated value. Gain 0-100db. Minimum increment is 0.1db. Horizontal and Vertical gain can be adjusted individually or together Sensitivity 200V/Ω adjustable Digital Rate 10...
TMTeck Instrument Co., Ltd
|
Mechanical Eddy Current Position Sensor Short Distance Eddy Current Detector
![]() |
Eddy Current Displacement Sensor For Mechanical Displacement & Vibration Measuring INTRODUCTION Eddy current displacement sensor is an non-contact sensor that against on the principle of eddy current effect. It is used for measuring the size, vibration......
Weifang Huantaitongshang Import And Export Co., Ltd.
|
Profiled Bar Eddy Current Detector Off Line High Testing Speed Via Roller Way
![]() |
Off-line eddy current testing system introduction This off-line eddy currment detecting equlipment is used in high accuracy flaw testing for workplece that already be finished. Automatic testing procedure: Using up-loading system, via roller way, the ......
XIAMEN COBE NDT TECHNOLOGY CO.,LTD
|
AJR NDT AEC-610 Portable Eddy Current Flaw Detector
![]() |
AJR NDT AEC-610 Portable Eddy Current Flaw Detector Introduction It has been proved by research that, operate smart keyboards with thumb is much easier than with other fingers because it has less joints. AEC-610 takes this advantage to realize one-finger ......
AJR NDT CO., LIMITED
|
6mN.M-1000mN.M Water Cooling Eddy Current Dynamometer For Engine Testing
![]() |
Speed Eddy Current Dynamometer with Water Cooling LCD Display 100 Hz Data Sampling Rate *, *::before, *::after {box-sizing: border-box;}* {margin: 0;}html, body {height: 100%;}body {line-height: 1.5;-webkit-font-smoothing: antialiased;}img, picture, video......
Shenzhen Precision Motive Technology Co., Ltd.
|
PR6423/003-010 EPRO 8mm Eddy Current Sensor M10 X 1 Without Armored Cable 55mm Sleeve Length 5m Total Cable Length
![]() |
...Eddy Current Sensor M10 x 1 Without Armored Cable 55mm Sleeve Length 5m Total Cable Length Additional Information: Features Operating Frequency Range: 10 Hz to 10 kHz Sensitivity: 10 mV/ (mm/s) Output Voltage: 0 to 10 V Accuracy: ±0.5% Temperature Range: -20°C to 80°C Case: Stainless Steel Cable: PTFE (Polytetrafluoroethylene) Connector: Brass, nickel-plated Description: The PR6423 sensor uses eddy currents......
Joyoung International Trading Co.,Ltd
|
SECD260B-1800/7500 1.3 Inertia Eddy Current Dynamometer
![]() |
... to the outlet water temperature, When the outlet water temperature rises, it adapts to increase the water pressure ,so the temperature decreased. 4. Environment temperature:-10℃-40℃ 5....
Seelong Intelligent Technology(Luoyang)Co.,Ltd
|
Multi - Frequency Intelligent Portable Raman Spectrometer Eddy Current Flaw Detector
![]() |
...Eddy Current Flaw Detector intelligent, portable, multi-frequency Working Principle The eddy current detection technique is based on the principle of electromagnetic induction, and the excitation signal is loaded into the probe coil. When the probe is close to the metal surface, the alternating magnetic field around the coil will generate the induced current......
Mitech CO.,LTD.
|