Home > Electrical Equipment & Supplies > Electrical Instruments > Battery Testers >

100mm Iec 60601 1 Test Rod

1-10 Results for

100mm iec 60601 1 test rod

from 4 Products

4mm Diameter IEC 60601-1-Test Rod for Electrical Safety Testing

IEC 60601-1-Test Rod According to IEC 60601-1-clause 8.4.2 Diameter: 4.0(-0.05~+0)mm Length: 100(-0~+0.5)mm TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING IEC 60601-1:2005 + Am.1:2012 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Clause Measurement/testing Testing......

KingPo Technology Development Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

IEC 60335-2 Test Rod For Interlock Concealment Door Of Microwave Oven

IEC 60335-2 Test Rod For Interlock Concealment Door Of Microwave Oven Standards For Test Rod For Interlock Concealment: The test rod meets the standard requirements of IEC60335-2-25 clause 22.105 figure 101, EN61010-1, UL3101-1, UL3111-1 and CSA1010-1, etc. Technical Parameters For Test Rod For Interlock Concealment: Diameter 3 mm,100mm long, the handle is made of nylon, the rod is hardened steel. Rod......

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

Length 100mm Rod Test Finger Probe With Nylon Handle IEC 60335-2-16

Test Rod With Nylon Handle 100mm Product information: The test probe is designed and manufactured according to the IEC 60335-2-16 clause 22.102. It is used to test concealment of the reset button of a protective device. Appliance is checked by applying a rod in any direction to touch the protective device which is in off state. The diameter of rod is 76 mm ±0.1mm and it has a flat end. There shall be a distance of at least 1.5mm between the rod...

Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

IP4 Code Test Finger Probe IEC60529 1.0mm Test Wire With Calibrated Certification

... against access with a tool. Meets IEC and EN Standards including IEC 60529 for IP4 and suffix D codes. The handle and stop face are made of Delrin®. The rod is made of stainless steel. Specification: Length of test wire: 100mm Diameter of test wire:...

Pego Electronics (Yi Chun) Company Limited

Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China

Submit your “100mm iec 60601 1 test rod” inquiry in a minute :

*From:	Your email address is incorrect!
To:	Pego Electronics (Yi Chun) Company Limited Products: IP4 Code Test Finger Probe IEC60529 1.0mm Test Wire With Calibrated Certification
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “100mm iec 60601 1 test rod” inquiry

*From:
Your email address is incorrect!
To: KingPo Technology Development Limited
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0