Testing Equipment For The 0.4KW 10KN Glass Bend Testing Machine With Special Jig
|
...10KN Glass Bend Testing Machine With Special Jig Product Description The bend testing machine is used to test bending fatigue, bend strength of brittle materials, such as ceramics, glass, timber. The bend testing can do test of central point bending and three-piont bending......
Dongguan Gaoxin Testing Equipment Co., Ltd.，
|
10KN Sole Adhesion Tester / Shoe Testing Machine For Tear , Break Test
|
... tension, bending, peeling, compression, sagging, adhesion, tear and other mechanical tests and analysis to metal and nonmetal raw material and workpiece. 1.Mechanical test like tensile,compression,bending,tearing,and others. 2.Doule-control function by...
SKYLINE INSTRUMENTS CO.,LTD
|
Glass Bending Degree and Thickness Automatic Tester Auto Glass Curvature Thickness Testing Instrument
|
...Tester is a specialized detection equipment designed and manufactured by Lonroy for automatically detecting the bending degree and thickness of glass. This equipment has applied for a national utility model patent, with the patent number: ZL202022245692.X....
DONGGUAN LONROY EQUIPMENT CO LTD
|
IEC 60884-1 Bending Test Apparatus bend tester without screw thread
|
...Bending Test Apparatus bend tester without screw thread Production introduction: According to the provisions of IEC 60884-1, GB2099.0-1996,12.3.12 provisions of the non threaded terminal bending testing machine. The test machine without screw thread is mainly used for the bending......
Guangzhou HongCe Equipment Co., Ltd.
|
AS/NZS 3112:2011 Standard Force For Pin Bending Tester Clause 2.13.7.2
|
... tests shall be tested as follows: Pins of assembled plugs shall be tested by clamping the plug in a rigid holding block and applying a bending force, as shown in Figure 2.8, to the pin under test. The pins shall be...
KingPo Technology Development Limited
|
IEC 60851-3 FCB-I Flat Wire Circular Bending Tester With Two Hosts
|
...wire’s cross section 16mm or less than 16mm, such as enameled wires, paper-covered wires, fiber-glass covered wires, film-covered wires and the responding flat copper wires and aluminum wires. Bending Host NO.1 and NO.2 two hosts Diameter of Flange NO.1...
Dongguan Zhongli Instrument Technology Co., Ltd.
|
Leather Testing Equipment Bending Tester JIS-K6545 12 Sets Grips 70 x 45 mm
|
... bending test, observe the material damage, record the bending times while broke. Standard: CNS-7705,JIS-K6545,BS-3144 Specification: Model RS-8232 Test Speed 100±5cpm Grips (optional) 6 sets or 12 sets Specimen 70x45mm Bending Angle 22.5°...
Infinity Machine International Inc.
|
Auto Glass Bending Furnace , Tempered Glass Bending Equipment OEM Service
|
...Glass Bending Tempering Furnace 1800*(1000 mm Product Description: It adopts radiation or convection type heating technology which can temper glass with the best quality. Tempered Glass type includes : clear glass, tinted glass,pattern glass,screen printed glass, float glass, on--line and off-line Low-E(E=0.02) glass etc. Tempered glass......
LUOYANG AOTU MACHINERY CO.,LTD.
|
T Bend Tester High-Precision Paint Testing Equipment
|
... radius of curvature, wherein the radius of curvature is determined by the spacer. After the test plate is bent, check the coating cracking of each sample plate through a magnifying glass and observe the peeling of the...
Hebei Better United Import And Export Co., Ltd.
|
Windshield Glass Bending furnace with multiple wagons continuous bending oven
|
... technology and reasonable control of the production process makes this furnace can produce the products in full compliance with the optical properties of automotive glass inspection standard. 2. Bending furnace inlcudes following sections: Loading system...
Luoyang Lever Industry Co.,Ltd
|
Submit your “10kn glass bend tester” inquiry in a minute :