IEC 60335-2-17 Electrical Blanket Spark Ignition Testing Equipment
|
... heating appliance flammability, to test whether the charged body arcing caused overheating or combustion. In a 65 ± 2 ° C in a heating cabinet, supply the sinusoidal rated output voltage 10KV, pass through the position where is 6±0.1mm far from the...
Sinuo Testing Equipment Co. , Limited
|
Upholstered Furniture Ignitability Testing Equipment by ISO 8191
|
... of upholstered furniture conduct test methods and evaluation. This section applies to public places with mattresses, sofas and other upholstered furniture resistance to ignition test and evaluation, furniture Soft package resistance to ignition. Standard:...
Advanced Instruments Co.,Limited
|
10kV EVSE Testing Equipment Circuit 3 Impulse Test Generator
|
10kV EVSE Testing Equipment Circuit 3 Impulse Test Generator Complied Standards & Clauses This surge test generator conforms to IEC 62368-1:2018 clause 5.4.2, 5.5.8 and Annex D, circuit 3 of Table D.1, Annex G.10, etc., IEC 60950-1:2013 clause 7.4.2, reference 3 of table N.1, IEC60065:2014 clause 10.2, 13.3.4 a). Equipments......
Sinuo Testing Equipment Co. , Limited
|
High Current Arc Ignition Testing Equipment For Arc Resistance Test Of Electrical And Electronic Products
|
... Ignition Testing Equipment Product Overview: According to IEC 60950-1:2001 "Safety of Information Technology Equipment" and UL746A, IEC60947.1:1999 and other standards specified in the simulation safety test items. The high-current arc ignition ......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Building Material Flammability Tester Ignitability Testing Equipment
|
... ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advanced horizontally until the flame (length ......
SKYLINE INSTRUMENTS CO.,LTD
|
Building Material Flammability Testing Equipment Ignitability Test Single Flame Source
|
...Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advanced horizontally until the flame (length ......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
IEC60695 Flammability Testing Equipment HWI Hot Wire Ignition Tester
|
...Equipment IEC60695 Hot Wire Ignition Tester , HWI Test Equipment Product information: This tester conforms to the standard requirement of IEC60695-2-20. It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time. Hot-wire coil ignition test...
Guangzhou HongCe Equipment Co., Ltd.
|
JSY-03 Power Transformer Testing Equipment 10kV Capacitance And Tan Delta Tester,Maximum output current 200mA
|
... Conversion And Calculation, Features Strong Anti-Interference Ability, Fast Test Speed, High Precision, Automation, Easy Operation. Its High-Power Switch Supply Can Output 45Hz And 55Hz Pure Sine Wave, Boost Automatically With Voltage Up To 10kV. As...
Wuhan GDZX Power Equipment Co., Ltd
|
High Current Arc Ignition Tester Arc Ignition Speed 40 Times/Minute Flammability Testing Equipment
|
...Ignition Tester Arc Ignition Speed 40 Times/Minute Flammability Testing Equipment Product Introduction HAI-1 High Current Arc Ignition Tester is a professional Flammability Testing Equipment created by the original manufacturer. It strictly follows international standards and provides enterprises with reliable material flame retardant performance testing support with efficient and accurate testing......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC60695 Flammability Test Equipment HWI Hot Ignition Wire Tester
|
...Test Equipment HWI Hot Ignition Wire Tester IEC60695 Flammability Testing Equipment HWI Hot Wire Ignition Tester Lab Equipment IEC60695 Hot Wire Ignition Tester , HWI Test Equipment Product information: This tester conforms to the standard requirement of IEC60695-2-20. It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition...
Dongguan Kingpo Technology Limited
|
Submit your “10kv ignition testing equipment” inquiry in a minute :