High Pressure 10MPa IPX9 IEC Test Equipment ISO30653 2006 Standard
|
...: This equipment is used to inspect the IEC enclosures for the electrical equipment (IP supplementary code test), and it is applicable for waterproof testing of the electrical and auto parts under high temperature and high pressure. Confirm to standards:...
Dongguan Kingpo Technology Limited
|
manual IEC Test Equipment IEC 60811 Cold Bend Test Apparatus For Cables Sheaths And Insulation
|
... bending performance of wire and cable at low temperature. The equipment is mainly composed of low temperature thermostat, winding device and material testing system. It is suitable for circular wire and cable with outer diameter less than or equal to...
Guangzhou HongCe Equipment Co., Ltd.
|
200g Striking IEC Test Equipment Pendulum Hammer Test Apparatus For Mechanical Strength
|
... hammer and Annex D; IEC 60884-1 'Plugs and socket-outlets for household and similar purposes – Part 1: General requirements' clause 24.1, figure 22-......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC61058 Load Box IEC Test Equipment
|
...equipment testing IEC test equipment Product overview: This load box is designed and manufactured according to IEC60884, IEC61058, IEC606691 standards and etc. It is used for the on-off ability test and the normal operation lifespan test of the Switches for household and similar fixed-electrical installations. Besides, it is also applied in the test......
Guangzhou Shice Equipment Co., Ltd.
|
Spring Impact Hammer For IEC60068-2-75 IEC Test Equipment
|
Spring Impact Hammer For IEC60068-2-75 IEC Test Equipment Standard: IEC 60068-2-75 Environmental testing –Part 2-75: Tests – Test Eh: Hammer tests. IEC 60065, IEC60335-1, IEC60598-1 and etc. Feature: The construction consists of a moving hammer head......
KingPo Technology Development Limited
|
Test Finger Probe,precision iec test equipment,jointed iec test finger probe
|
... of person aganist access to to harzardous parts of an IP2 code.Also used to verify protection from access with the back of the hand for an IP suffix B code. Standard test finger probe is made of plastic and steel,very precision....
ALLIED TESTING (HK) CO.,LTD.
|
IP1X / IP2X Iec Test Equipment , Test Sphere Diameter 50 Mm With Handle
|
Test Ball Test Sphere with Diameter 50mm and 12.5mm for IP1X and IP2X Testing Test Probe 1 (500g steel sphere) Introduction: Designed according to IEC61032 figure 5, meet the requirement of IEC60529-IP. The diameter of the sphere is 50mm+0.05, sphere is ......
Pego Electronics (Yi Chun) Company Limited
|
High Pressure Waterproof Test Equipment Laboratory Testing Instruments 8MPa-10MPa
|
...Test Equipment HH0807 Parameters: Test Water Temperature 80±5 ℃ Nozzle specification It is designed according to the standard figure Nozzle number 4(0°,30°,60°,90°) Spray pressure 8MPa-10MPa(adjustable) Spray flow 14l/min-16l/min (change according to pressure) Spray distance 100～150mm adjustable(The maximum side of the test......
shanghai kerang technology co ltd
|
White Nozzle Hydraulic Fire Testing Equipment Hydrant 5 ~ 10Mpa / Min Adjustable
|
...Testing Equipment Hydrant 5 ~ 10Mpa / Min Adjustable Scope of application: 1. Applicable to all kinds of fire water guns with pressure of 0.2mpa ~4.0Mpa and no more than 16L/s. Meet the standard: 1. Refer to the standard GB3445-2005 "indoor fire hydrant", gb12514.2-2006 "fire protection interface", gb8181-2005 "fire hydrant", fire hydrant test equipment......
Dongguan HOOHA Electrical Equipment Company Limited
|
IEC 60227-1 Tinsel Cord Bending Snatch Test Equipment EV Connector Testing Equipment
|
...Test Equipment Complied Standards & Clauses IEC 60227-1 clause 5.6.3.2, 5.6.3.3; IEC 60227-2 clause 3.2, 3.3; and etc. Equipment Overview The Tinsel Cord Bending and Snatch Test Equipment is designed and manufactured according to the standard requirement of IEC 60227-1 clause 5.6.3.2, 5.6.3.3; IEC 60227-2 clause 3.2, 3.3; and etc. It is used to test......
Sinuo Testing Equipment Co. , Limited
|
Submit your “10mpa iec test equipment” inquiry in a minute :