Mouth Actuated 13.8Kpa Toys Testing Equipment Catapult Endurance Tester
|
.... Standards: EN-71-1 section 8.17.1 Test principle The catapult was placed into the mouth-actuated projectile toys. Add pressure of 13.8kPa ± 5% on the mouthpiece, lasts for 5 seconds, test a total of 10 times. Detecting whether the projectile through the...
Gester International Co., Ltd
|
Children Toys Testing Equipment EN71-1 Toy Safety Sharp Edge Tester
|
... to a mandrel, which is then rotated for a single 360-degree revolution along the accessible edge being tested. If the tape is cut in half or longer in length (approx. 13 mm), the edge is identified as a hazardous sharp edge. Toys intended for use by...
SKYLINE INSTRUMENTS CO.,LTD
|
EN71-1 LCD Touch Screen Control Mouth Actuated Toys Testing Equipment
|
... mouth moving toys or children's mouthpiece has been mistakenly inhaled and cause a choking hazard Load the mouth-actuated projectile toy with the intended projectile and apply a pressure of 13,8 kPa ± 5 % in the direction of the mouthpiece for 5 s....
Dongguan Hust Tony Instruments Co.,Ltd.
|
ISO 8124-1 Toys Kinetic Energy Testing Equipment Toys Testing Equipment 1.000000S
|
... the tube or external testing of the components of the two sensors detect the ejection toy parts used away after a certain period of time, it has calculated the move Energy. The main instruments used for this test launch of baby toys or children's safety....
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
320g Antiwear Toys Testing Equipment Aluminum Alloy moistureproof
|
...Toys Testing Equipment Rattle Sound Bell Toys Tester Description: The bell toys tester is also called the sound toys tester, the toys testing template AB and sound toys testing template. There are two kinds of template: the round one and the oval one. It stimulates the volume of the mouth to check whether the toys or the toys......
DONGGUAN YUYANG INSTRUMENT CO.,LTD
|
ASTM F963 Toys Testing Equipment Finger Probe Testing Equipment
|
...Testing Equipment for Children Safety Toys Test Description: The simulated finger is designed according to the standard of ASTM F963 and EN-71 as well as16CFR 1500.48,49. It is used to test whether there is possibility that one part of the object can be touched by the children. Probe A: for the children under 3 years old. Probe B: for the children over 3 years old Standard Configuration: Accessibility Probes AB 1 set,Test...
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
IEC60695-2-13 Glow Wire Testing Equipment Heat Resistance Test Apparatus
|
... index (GWFI) test method for materials” IEC60695-2-13 “Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials” IEC60695-2-10 “Fire hazard testing - Part 2-10:...
Sinuo Testing Equipment Co. , Limited
|
Clause 13.4 Tracking Test Equipment Determination Of The Relative Resistance To Tracking Performance
|
...13.4 Tracking Test Equipment Standard: Conforms to IEC 60065:2014 clause 13.4, IEC60335-1 clause 29.2, Annex N Application: It is used for determination of the relative resistance to tracking performance that solid electrical insulating material under the action of an electric field, when the surface exposed to water containing impurities. Test sample: Lighting equipment......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 60702-1 Clause 13.6 Bending Test Equipment For Vehicle Charging Cables
|
... is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the ......
Sinuo Testing Equipment Co. , Limited
|
EN 71-1 ASTM F963 Light Testing Equipment , Toy Safety Sharp Edge Test Device
|
... intended for use by children under 8 years of age, and such edges exposed in normal use or as a result of reasonably forseeable damage or abuse of such toys and articles, present a potential risk of injury by laceration or avulsion. Standards: EN 71-1...
KingPo Technology Development Limited
|