1 Watts Power Male Plug Termination Load 18 GHz 1.25 VSWR
|
...Termination (Load) 1 Watts low Power To 18 GHz 1.25 VSWR 1Watts Power TNC male RF load from Xi'an Elite Electronic is 50 Ohm impedance and is rated for a maximum frequency of 18 GHz . Dummy load / RF termination has a maximum input power of 10 Watts and a maximum VSWR of 1.35:1 The low-power matched RF load......
Xi'an Elite Electronic Industry Co., Ltd.
|
100 Watts 4.3-10 Male Low PIM RF Load Termination
|
...RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system...
HeFei Vinncom Science And Technology Co.,LTD
|
N Male Cu RF Load Termination 2.92mm 50 Watt Dummy Load
|
50W DC-18GHz N connector Coaxial Termination DC-4GHz, 8GHz,12.4GHz,18GHz are available with N, SMA connector . Zysen also offer a series Coaxial Termination frequency up to 67GHz , Power handling from 0.5 to 2000watts,connector SMA,N, 2.92mm or chip, ......
Chengdu Zysen Technology Co., Ltd.
|
High Power 50 Ohm RF Load terminator 450MHz~2600MHz
|
...Watts N Male 3.8GHz 4GHz RF Dummy Load Termination Wide band Good VSWR Good water resistance Part Number VN-LD-4G-60~80W-ONm Operating Frequency ( GHz ) 0-4 Impedance ( Ohm ) 50 VSWR ≤1.20 IM3 (dBc @ 2×43dBm) -110 / -120 Application Indoor & Outdoor Degree of Protection IP65 Operating Temperature ( ℃ ) -40 ~ + 80 Interface N Male Handling Power (Watt......
HeFei Vinncom Electronic Technology Co.,Ltd.
|
10W Dummy Load High Power RF Load PIM 155dBc DIN Connector IP65 Outdoor Application
|
... termination to properly terminate the output port of a device or to terminate one end of an RF cable. Lenolink Termination loads are characterized by low VSWR, high power capacity and performance stability. Widely used for GMS/DCS/UMTS/WIFI/WIMAX etc....
Lenolink Telecommunication Co.,Ltd
|
DC-4000MHz 50 Ohm N-M 10W Watt Male RF Coaxial Termination Dummy Load N-M Interface
|
FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Frequency Range(MHz) DC-4000 VSWR ≤......
Anhui Bonfire Technology Co., Ltd
|
300w Aluminum Waveguide Load / Rf Load Termination 26.5-40ghz Anti Rust
|
Aluminum Waveguide Load Waveguide Components 300w From Factory Product type Bandpass filter Model Bpf0.3-0.5gn-2947 Passband frequency 0.3-0.5ghz Insertion loss ≤0.5db Inhibition ≥40db@0.6-1ghz VSWR ≤1.5 Material Aluminum alloy Exterior color Painted black......
Chengdu SinoScite Technology Co., Ltd.
|
High Power 50 Watt RF Load Up to 4GHz with N Male Black Anodized Aluminum
|
RF Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or ......
Terui International Group Co.,Ltd.
|
DC-3.8GHz 30W N Female Connector GSM Dummy Load RF Dummy Load Termination Load
|
...Application Indoor & Outdoor Degree of Protection IP65 Handling Power (Watt max.) 30 Operating Temperature( ℃ ) -40 ~ + 80 Body Material Aluminum Connector Material Brass(Silver plating for Inner ......
SHENZHEN ZD TECH CO., LTD
|
Female SMT Type IPX High Power RF Connectors RF Termination Load For WiFi Routers
|
Female SMT Type IPX High Power RF Connector rf termination load for WiFi Routers Product Details: Product name: DALEE RF Connector Secification: three generation Type : Female Certification: ISO9001,UL,ROHS and the latest REACH Voltage Rating: 60 VAC ......
Dalee Electronic Co., Ltd.
|