2 1/16 Inch 20000psi Choke Kill Manifold For Oilfield Well Testing
|
... for cleaning the well up and facilities to install and change choke of fixed sizes for more accurate flow control during main good flow periods. Choke Kill Manifold Parameter Type Working pressure Main bore dia By-pass dia....
Hebei E-valves Petroleum Equipment Co., Ltd.
|
Kill Manifold Working pressure: 2000PSI~20000PSI Nominal Bore: 2.1/16"~4.1/16"
|
... of check valves, gate valves, line pipes, pressure gauges. In case of increase in well head pressure, the kill manifold can provide a means of pumping heavy drilling fluid into the well to balance bottom hole pressure so that well kick and blowout can...
XIAN ATO INTERNATIONAL CO.,LTD
|
Pneumatically Controled Drill Accessories Kit Kill Manifold Working Pressure 10000 Psi
|
Kill Manifolds Introduction Kill manifolds are used to forcibly inject heavy drilling fluid, fresh water and fire extinguishing agent into the well to carry out well-kill operation, prevent well kick, blowout or fire, and fire suppression operation after fired. It can be open flowed through flow out pipeline directly to release bottom pressure of the well. Technical Parameters Working Pressure: 35~140MPa(5000~20000PSI......
Xi'an TianRui Petroleum Machinery Equipment Co., Ltd.
|
API 6A /Choke & Kill Manifold /Kill Manifold
|
Kill manifold is a key part in the control devices of oil/gas well,which has the function that,as the drilling string can not be used for normal operation,the kill manifold shall be used to pump drilling fluid into the well so as to control the downhole pressure,one end of the kill manifold shall be connected with the side hole of drilling spool and teh other end shall be connected with the mud pump. Main technical parameters Name Choke manifold...
Shanghai RuiTou Petroleum Machinery CO.,LTD.
|
2 Inch Fig1502 Chiksan Swivel Joints For Choke And Kill Manifold Lines
|
... and their repair kits are available, suitable for normal or low temperature, or H2S environments, with sizes ranging from 1" to 4" and rated WP ranging from 2000psi~20000psi (14MPa~...
Dongying Oilman Machinery Equipment Co.,Ltd.
|
Oil Well Flow Control API 16C Choke And Kill Manifold
|
...Kill Manifold For Oil Well Flow Control with API 6A Valves The chock manifold and the kill manifold are important well flow control equipment for down-hole operation, The design and the manufacture of the choke and kill manifolds conform to API16C standard. The choke manifold and kill manifold is used to carry out near balance drilling. During drilling, the choke manifold and kill manifold......
XI‘AN ZZTOP OIL TOOLS CO.，LTD
|
AISI Choke And Kill Manifold Api 16C Choke Manifold 4 1/16" X 5000psi
|
... the risk of fire. Kill manifolds are used to forcibly inject heavy drilling fluid, fresh water and fire extinguishing agent into the well to carry out well-kill operation, prevent well kick, blowout or fire, and fire suppression operation after fired. It...
XI 'AN ZZ TOP OIL TOOLS CO.,LTD
|
52-130mm Drilling Manifold 3000psi-20000psi Choke Manifold Parts
|
52～130mm Drilling Manifold 3000psi～20000psi Product Introduction Choke manifold is necessary device to control the well kick successfully and execute the pressure control technology on oil/gas well in the course of drilling, as it is, the device is ......
SHIFANG HUIFENG OIL PRODUCTION MACHINERY CO.,LTD.
|
API 16C Choke& Kill Manifold for flow control with valves
|
... circulation and bleed by opening and closing the gate valve of the manifold or adjusting the choke valve. It also can adjust the pressure between the bit pressure and the casing. They are the tools used for the balance-drilling or the unbalance-drilling....
Dongying On-tech Equipment Co., Ltd
|
CCSC Kill Choke Manifold Working Pressure 2,000psi - 15,000psi 2-7 Inch
|
... 6A&API 16C standards. They are specifically made for injecting heavy mud, water and extinguishant during drilling CCSC has many sizes and pressure ratings Kill manifolds used for drilling applications. Features On-site maintanence Flexible for...
CCSC Petroleum Equipment Limited Company
|
Submit your “20000psi kill manifold” inquiry in a minute :