K30 / K40 20.5mm Carbide Unground Rod Grain Size 0.8μM Cutting Steel Rod
|
...5mm Unground carbide rod for cutting general steel with grain size 0.8μm ISO Grade Grain Cobalt Density Hardness T.R.S Application um % g/cm3 HRA N/mm2 K30-K40 0.8 10-10.2 14.3-14.4 91.5-92.0 3500-3800 It's used for making drills, and end mils, suitable for cutting general steel, Grey cast iron, stainless steel, and heat resistant alloy. Specification: Unground Diameter: 20.3mm +0.5 Length 330mm +5mm......
Zhuzhou TGC Cemented Carbide Co.,Ltd.
|
Length 330mm Tungsten Carbide Helical Rods , Unground Carbide Blank Rods
|
Tungsten Carbide Helix Coolant Holes Rods Unground Carbide Blank Rods Two helical coolant rods in 40° Outer Diameter mm TK mm Inner Diameter mm Deviation of holes position≤(mm) a Pitch mm Stock status • OED10A OED10.2 OED10D OEDU12 OD Tol. TK Tol. ID Tol......
Hunan Golden Globe I&E O.E.D Co., Ltd.
|
Unground Tungsten Carbide Round Rods Blanks Cemented Carbide Rods
|
Unground tungsten carbide round rods blanks cemented carbide rods Characteristics of Material Properties 1. Using high-quality ultrafine tungsten carbide and imported cobalt powder as raw materials. 2. Standardized production using world advanced low-......
Zhuzhou Weikeduo Cemented Carbide Co., Ltd.
|
Abrasion Resistant Tungsten Carbide Tube Blank Carbide Hollow Rod
|
... 5. Chmafered rods 6. One side chamfered with weldon shank rods 7. Special customized rods Specification Material: Wc+Co Dimension: OD12*ID6*300mm various size for choose Grade YG11 Compostition 11%Co+90%WC Type: carbide hollow round rod Surface: blank or...
Zhuzhou Zhenfang Yaguang Tungsten Molybdenum Co., LTD.
|
High Strength Cemented Carbide Rod Factory Carbide Cutting Rods
|
A highly cost-effective tungsten carbide rod blank raw materia Xiamen Xincheng Wholesale Tungsten Carbide Rods Factory, specializing in wear-resistant and impact-resistant tungsten carbide rods. Unground Carbide Rods-Inch Type Dimension Grade D Tolerance ......
Xincheng (xiamen) cemented carbide co., ltd.
|
High Strength Rock Drill Rod Self Drilling T51 21.5mm 6 Inch
|
...Rod Self Drilling T51 21.5mm 6 Inch Description Drill rod using T51 thread system. In good rock conditions it will produce straighter holes and at least 10% higher penetration rate compared to rod and coupling sleeve combination system. • T51 thread system • Widely used in drifting, tunneling, benching, and long hole drilling Color: Based on Customer requirements Material: Tungsten carbide......
KSQ Technologies (Beijing) Co. Ltd
|
Extrusion Polishing Carbide Drill Rod , Customized Size Solid Carbide Rods
|
...Carbide Rod , Customized Size Application: ► For PCB Drills, Drills, End Mills & Dole Drilling Tools, Gun Drills ► For Reamers ► For Mold Punches ► Core Pins, etc. Grade: Grade Density (g/cm3) T.R.S (MPa) Hardness (HRA) YL10.2 14.5 3400 92.5 YG11C 14.4 2260 87.5 YG6X 14.9 1560 91 YS2T 14.45 2800 92.5 YG15 14.1 2400 86.5 Speciafications: Ungrounded 10% Cobalt Solid Tungsten Carbide Rod......
ZHUZHOU SEEGO CARBIDE TOOLS CO., LTD.
|
YB10L Rough Tungsten Steel Rod Length 200mm Outer Diameter 1.5mm~50mm Exquisite Carbide Round Rod Wear-Resistant
|
...e of tungsten carbide (WC) as the main raw material, adding other precious metals and paste phases, and pressing and sintering by powder metallurgy. 2. The hardness of the YB10L tungsten steel rod is 89HR and the density is 12g/cm. 3. The length is 200mm,...
Zhuzhou Sanyinghe International Trade Co.,Ltd
|
H6 Tolerance Solid Cemented Carbide Round Rod
|
...HIP sintering). 3. With production experience over 20 years. We can make extruded carbide solid rods or die pressing tungsten carbide tube. 4. Standard length 100mm and 330mm, dia. from 0.5mm to 60mm, also can produce according to customers' requirment. 5....
Zhuzhou Mingri Cemented Carbide Co., Ltd.
|
Double Straight Hole Cutting Tools 3.2 - 20.2MM Polished Tungsten Carbide Steel Rod
|
...; D Coarse Embryos TK Double Hole Spacing d Inner Hole D Grinding L The Length Of The Outer Diameter (MM) The Tolerance Tol.(+1.5MM) Pitch TK (MM) The Tolerance Tol.(+1.5MM) The Inner Diameter d (MM) The Tolerance Tol.(+1.5MM) h 6(MM) The...
Chengdu Lian Xiang New Material CO.,LTD.
|
Submit your “21 5mm carbide unground rods” inquiry in a minute :